3D Flight Piper Super Cub Manual page 21

Install ESC/Battery/Reciever
Install and connect your ESC, battery and receiver. Recommended to place your battery and
ESC in the locations shown for balance reasons. It's also recommended to place a small piece
of velcro under the battery location to keep your battery in place. Inserting and connecting your
battery should be done through the lower hatch in the future.
Screw Wing to Fuselage
Use self tappers to screw the wing to the fuselage. Make sure to connect all servos to the
receiver at this point since the wing will not be disassembled unless desired for storage.
20