3D Flight Piper Super Cub Manual page 17

Glue Screw Inserts In Place
Glue screw inserts into the locations shown in the fuselage. Access should be relatively easy
through the hole cut for the wing servo leads. There are 4 locations in the top of the fuselage for
wing assembly and 14 locations in the bottom of the fuselage for strut and landing gear
assembly. Recommended to use tweezers or needle nose pliers for this step for access
reasons.
Glue Rear Gear Screw Insert
Glue the rear gear screw insert into the receiving slot in the rudder.
16