Pixel KNIGHT TR-331 Product Manual page 10

How to use the transmitter of Knight TR-331TX
set function mode of next group and the LCD show as [
need to set all the groups from group A to group E respectively.
F. You can press [ ] gently to set the parameter of each group, the
POWER
function mode include OFF and TTL.
If set group A as OFF mode, all receivers of group A will not participate to flash.
If the group A was set as TTL mode, all receivers of group A will flash under TTL mode,
En
when the flashgun not support to TTL will flash in manual mode, the same as the
flashgun which is not compatible with the devices.
G. The device will automatically save the setting and standby after 4s without
any operation.Or press [
POWER
setting and exit.
H. When complete the function setting, you will need to use the camera
after the device exit the setting mode.
1. When using the external flashgun which compatible with Nikon the following
functions can be realized.
Knight series products would not support the creative CLS system of Nikon
14
]. You'll
] and [ ] at the same time to save the
SET
How to use the transmitter of Knight TR-331TX
flashgun.
Knight would not support Nikon SB-600 and vice factory flashgun to flash
in manual mode, it'll only support them to flash in TTL mode.
The device will support the I-TTL, FP, BL, M, GN flash mode of the flashgun.
I-TTL function will support all function mode and shutter speed of Nikon
camera, the sync speed will up to 1/8000s.
I-TTL mode will support to set the parameter of exposure compensation,
FV lock, red-eye reduction flash mode/red-eye reduction slow sync,
rear-curtain flash sync, ISO photo sensibility and electromotion zooming
through camera.
2. When using the incompatible flashgun or studio light, the following
functions will be realized.
The external flashgun will be able to flash in manual mode, the shutter
sync speed will up to 1/320s.
When using studio light, it will be able to flash through connect with PC
output socket, the sync speed will up to1/8000s.
En
1 5