Advertisement
VAN WALT
Monitoring your needs
QUICK START GUIDE:
Van Walt Ltd | Prestwick Lane | Grayswood | Haslemere | Surrey | GU27 2DU | Tel. 01428 661 660 | Fax. 01428 656 808 | www.vanwalt.com
YSI Pro Plus Water Quality Meter
Calibrating your YSI Pro Plus
Please contact Van Walt if you wish to calibrate your YSI.
Spot Checking
We would recommend a quality spot check to ensure the best results. Used solutions
will be charged for. Do not return any opened bottles of solution. Please call us for
help or guidance.
Problems
Please contact Van Walt if you have any problems.
When not in use
1.
Please store your YSI in a warm dry place. Please do not keep the YSI in peli-
case if inside of peli-case is very wet.
2.
When finished with unit, please rinse probes & fill the calibration cup to the
mark (approx. 1 cm) with tap water (deionised water should never be used
for storage!). Fit calibration cup by sliding it over the probes & screwing right
until hand tight.
Scan to download the video
+44 (0)1428 661 660
YSI Display & Logging
Advertisement
