Table of Contents
Advertisement
enter the original password after press "OK", otherwise the DVR will keep staying in the
changing password status, and the remote control will not work.
New password：Enter the new password
Operating Way:
Enter the menu, press"
modification mode， adjust the number by pressing"
save after adjustment。Press"
PTZ settings: Adjust and control the camera with external PTZ device.(NOT OFFERED ON
THIS UNIT)
Protocols: default PELCO-D, support PELCO-D.PELCO-
Bit rate: under RS485 port: 2400bps,4800bps,9600bps,38400bps,57600bps
Channel-Address: Channel one-Device address
Channe2-Address: Channel two-Device address
Channe3-Address: Channel three-Device address
Channe4-Address: Channel four-Device address
System Info: Display DVR hardware code number， software version information( only view,
couldn't be changed)；Reset the Factory Settings
"to select the options ,then press"
、
"key to exit after all settings done.
Page 11
,
,
,
"to enter the
"， press"
"to
Advertisement
Table of Contents
