Table of Contents
Advertisement
4. Initialize settings
the "model set initialize function"
It also enters
Please hold down the install button and turn on the power.
(5) In case of "INITIALIZE", set the internal memory setting value
to the initial value.
►It is not necessary to use USB flash drive.
►It decide by
►It will displayed same message of [10]-7.(4),
please operate according this message.
(6)
When returning to the standard screen without changing
the initial value
Please touch
If you touch
screen without initialize.
If you touch
(7) It change to the standard screen.
► Internal memory and shortcut icons are not deleted.
► If it is necessary to change language, please set the
language from
Refer to the technical document for operation panel page [17] - 6 "2. Language setting"
Note
To erase internal data, please use format.
Refer to the technical document for operation panel page [14] - 3 "Format".
screen as follows.
key
key, message is displayed.
key, it is possible to move standard
key, it is returned to previous screen.
"EASY SETTING".
[10] ‐ 9
Hide quick links:
Advertisement
Table of Contents
