Mitsubishi Electric PLK-J-CU-20 Technical Manual page 32

(3) It will start to install, please wait a while still complete installing.
The red LED on the front of the control panel will be displayed
during installation.
‡If the red LED flashes, the installation has failed, please check
the installation file and re-execute.
(4) After the installation is completed, the "model set initialize
function" screen will be displayed.
If "SELECT", select model data from USB.
►Please select the model name by
And it is decided by push the
►Message is displayed after reading model data.
►Message is displayed again after complete reading.
Please turn off the power.
Please re-turn on the power after power LED (Green) of
the control box is turned off.
LED (green)
key.
key.
[10] ‐ 5
LED (red)