Ezviz CS-X5-108T Quick Start Up Manual

UD.6L0208B0027A01
Operation/Fonctionnement/Operaciones
ENGLISH
The figures in this manual are for reference only and may differ from the actual
product.
1 Connect Cameras to DVR
Find the yellow BNC connectors of the Power + Video cable. Connect one end of the
BNC connector to the camera's BNC connector and the other end to the DVR's BNC
connector.
......
IN
OUT
VIDEO IN AUDIO
2 Power on the Camera(s)
1 Find the red power connectors of the Power + Video Cable.
2 Connect one end of the red power connector to the camera's power input, and
the other end to the Isolated Power Module.
3 Then use the 1-to-4 power cable if you have many cameras to connect
(Optional). Connect the Power + Video cable or 1-to-4 power cable to the
Camera Power Adapter.
Plug the camera power adapter into a power socket to power on the camera(s).
4
1
2
3
Connect the External Display and Mouse
1 Connect the monitor and DVR with the HDMI cable (included) if you want to Connect the monitor and DVR with the HDMI cable (included) if you want to
operate the system with the local menu. The DVR also supports VGA output (VGA operate the system with the local menu. The DVR also supports VGA output (VGA
cable not included). cable not included).
2
Connect the mouse to DVR via the USB port. Connect the mouse to DVR via the USB port.
1
2
IN
OUT
VIDEO IN
AUDIO
Connect the Network Cable
4
Connect the DVR to the router with a network cable via the network port. Connect the DVR to the router with a network cable via the network port.
IN
OUT
VIDEO IN AUDIO
5 Start Up the DVR
Connect the DVR to the power socket with the power cable.
1
2 For the CS-X5-108T
panel to start the DVR.
6 Install the EZVIZ International App
Search "EZVIZ" on the App Store or Google Play Search "EZVIZ" on the App Store or Google Play
1
International app. International app.
2 Launch the app and register. Launch the app and register.
Access the DVR
7
(Recommended) You can access the DVR through the EZVIZ International App. Find (Recommended)
the QR code on the upper surface of the DVR or the start-up wizard on the display. the QR code on the upper surface of the DVR or the start-up wizard on the display.
Log into the EZVIZ International App, scan the QR code, and then follow the Log into the EZVIZ International App, scan the QR code, and then follow the
prompts to add the DVR to the EZVIZ account. prompts to add the DVR to the EZVIZ account.
4
3
You can also access the DVR by operating the local menu. A start-up wizard will You can also access the DVR by operating the local menu. A start-up wizard will
pop up on the screen after the DVR starts, click the Start Wizard button, and follow pop up on the screen after the DVR starts, click the Start Wizard button, and follow
the wizard to set the DVR. the wizard to set the DVR.
ESPAÑOL
Las figuras de este manual solo se incluyen a modo de referencia y pueden no ser
idénticas al producto en cuestión.
Conexión de las cámaras al DVR
1
Localice los conectores BNC amarillos del cable de alimentación + vídeo. Conecte
un extremo del conector BNC al conector BNC de la cámara y el otro extremo al
conector BNC del DVR.
VIDEO IN
POWER WAN LAN1 LAN2 LAN3 LAN4 WPS/ RESET
and CS-X5-116T only, turn on the power switch on the rear
1
IN
2
OUT
VIDEO IN AUDIO
to install the EZVIZ to install the EZVIZ
TM TM
You can access the DVR through the EZVIZ International App. Find
......
IN
OUT
AUDIO