The manufacturer declares that the appliances are compliant with the prescriptions of the
EEC norm 90/396 for the gas part and with norm 73/23 for the electric part.
The installation must be done observing the norms in force particularly concerning room
ventilation and discharging gas emissions.
N.B.: The manufacturer declines any responsibility for direct or indirect damage caused by
improper or incorrect installation, maintenance or use of the appliance and alterations, as in
all the other cases considered in the items of our sales conditions.
Dimensions
MODEL
DWFS4
40 x 70 x 29h
•
The operations for installing, conversions for use with other types of gas and starting
up must be done only by qualified personnel whose qualifications comply with the
norms in force.
•
Gas installations, the electrical connections and the rooms in which the appliances are
installed must comply with the norms in force in the Country in which the installation
is carried out; above all, the appliance must be installed in a well ventilated room,
preferably under an extractor hood, so as to ensure the complete extraction of gas
emissions which are formed during combustion. The air necessary for combustion is
2m3 /h per kW of power installed.
Attention: In accordance with international rules, when connecting the appliance, an
automatic device enabling the disconnection of all contacts from the mains, must be
installed above it; this device must have a contacts opening of at least 3 mm.
8
DECLARATION OF COMPLIANCE
GAS TECHNICAL DATA TABLE
Burner
cm
7 kW
-
INSTALLATION
Burner
Nominal capacity
10 kW
Tot. kW
1
10
Gas coupling
ISO 7-1
R 1/2"GM
Officine Gullo