What To Do In The Event Of A Breakdown; Procedure To Follow If The Appliance Is Not Going To Be Used For Some Time - Officine Gullo DWFS4 Instructions For Installation And Use Manual

could result in an effect that is not compliant with our products. Any spots that may appear
over time on the burnished brass surfaces should be considered as a desirable and particular
characteristic of our craft metal working processes.
CLEANING CHROMIUM-PLATED BRASS SURFACES
No synthetic varnishes have been used to obtain the special polish on the chromium-plated
brass details in order to avoid spoiling the beauty of the chromium plating with an artificial
patina.
All the chromium-plated surfaces should be cleaned, where necessary, with a soft, possibly
micro-fiber cloth, combined with metal polishing products, if required. Do not use abrasive
pads.
CLEANING SATIN FINISH NICKEL-PLATED BRASS SURFACES
No synthetic varnishes have been used to obtain the special nickel-plating on the satin finish
nickel-plated brass details in order to avoid spoiling the beauty of the nickel-plated, satin
finished solid brass with an artificial patina.
All the nickel-plated and satin finished brass surfaces should be cleaned, where necessary,
with a soft, possibly micro-fiber cloth, combined with a neutral detergent, if required. Do
not use abrasive pads.
CLEANING THE VARNISHED SURFACES
All the varnished surfaces should be cleaned using a neutral detergent and, where necessary,
a soft, possibly micro-fiber cloth. Do not use abrasive pads or any other chemical products.
CLEANING BRUSHED STEEL SURFACES
All the brushed steel surfaces should be cleaned using degreasing products or products
specifically designed to be used on steel and, where necessary, extra-fine steel wool or
extra-thin sandpaper.

WHAT TO DO IN THE EVENT OF A BREAKDOWN

Turn off the gas tap and notify the after sales service.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT
GOING TO BE USED FOR SOME TIME
Turn off the gas tap and clean the appliance as specified above.
14
Officine Gullo