Table of Contents
Advertisement
VoiceCom 1000™
Interactive Voice Control
Your VoiceCom 1000™ features the most advanced interactive voice control
system giving you true and complete hands-free operation of your mobile
phone while driving. It offers you the possibility of dialing by simply saying the
phone number to be dialed, or dialing using preferred names. When dialing
numbers it only requires you to say the numbers sequentially, when dialing
using preferred names it requires the set up and management of names and
numbers of the "telephone book" of the system, which is speaker dependent.
The "telephone book" may be programmed with 30 names and is independent
of the names and numbers stored in the phone directory of your mobile phone.
Activation and Sequence
Activation of the interactive voice control of
your VoiceCom 1000™ is initiated by
pushing the activation button on the left side
of the Remote Control as shown in the
illustration. Voice commands are only
possible, when no phone call is in progress.
Pushing the activation button will activate a
tone alert and any of the initial voice
commands can be spoken.
Primary Voice Commands
After pushing the activation button the following voice commands are available:
• "Dial Number"
• "Dial Name"
• "Store Name"
• "Say Names"
• "Delete Name"
• "Delete All Names"
• "Redial"
• "Store Emergency Number"
• "Cancel"
Canceling can also be done by pressing the activation button again. The canceling
option is available in almost all interactive stages and resets the voice control.
Interactive Voice Control
-7-
Advertisement
Table of Contents
