Transferring A Call From The Hands-Free System To The Telephone; Ready To Use Your Voicecom 1000 - Rosen viocecom 1000 Owner's Manual

VoiceCom 1000™
Transferring a call from the hands-free system to the
VoiceCom
You can transfer an active call from the hands-free system to the telephone in
order to avoid third parties listening in, for example. To do this, press the left key
for more than half a second. Press the left button again to transfer the call back
to the hands-free system.

Ready to use your VoiceCom 1000™

Now you should already be quite familiar with the systems operation and how
to use your voice activated VoiceCom 1000™. Before using your hands-free
VoiceCom 1000™ system on the road, make some phone calls in order to find
out the optimum conditions for volume and direction of speech. Test placing
and receiving calls, the muting function and the audio level. It is important to
test the intelligibility of your voice when making a call. This is dependent on
the microphone sensitivity and the distance between the microphone and the
caller. If the caller on the other end finds your voice volume to low, you may be
able to increase the microphone sensitivity as described in the VoiceCom
1000™ Installation Manual. Please note, that increasing the microphone
sensitivity increases the risk of irritating echoes.
professional installer for making the necessary adjustments on the VoiceCom
1000™ Control Unit.
Negative Effects on Road Safety: You are now the proud
owner of the most advanced hands-free mobile phone
system and will have a safe and very convenient way of
operating a mobile phone in the car, however, talking on
the phone while driving reduces your concentration! This
may cause dangerous situations on the road. Also in
hands-free mode you should draw your main attention to
the traffic. In complex and dangerous traffic situations
you should refrain from using your mobile phone!
Ready to use your VoiceCom 1000™
-19-
Please consult your