Table of Contents
Advertisement
12
Unboxing and setup
4. Do the following to place your nano SIM and microSD cards into the tray:
With the gold contacts facing down, place your nano SIM and microSD cards into the SIM 1,
SIM 2, and SD holders of the tray. Make sure to align the cutoff corners of the nano SIM cards
to the notches on the holders.
By default, SIM 1 will connect to the 4G LTE/3G network, and SIM 2 will connect to 3G/2G. To
find out how to set the preferred card for connecting to 4G LTE, see
cards with Dual network manager
5. When reinserting the tray, make sure it is facing up so that your cards don't fall out. Hold the
tray with the microSD card between your fingers, and then steadily slide the tray all the way
into the slot.
6. Make sure the tray is fully inserted and doesn't protrude from the slot.
Follow the same procedure above to eject the tray and remove your cards. Before ejecting the tray,
make sure to unmount your microSD card first. See
on page 16.
Unmounting the storage card
Managing your nano SIM
on page 60.
Advertisement
Table of Contents
