Troubleshooting - BOMANN GSPE 882 Instruction Manual

Built-in dishwasher

Hide thumbs

Table Of Contents

Table of Contents

Cleaning the spray arms

Lime and impurities from the rinsing water can block nozzles and bearings of the spray arms. Check the outlet

nozzles of the spray arms regularly for blockages.

• Unscrew

Pull off the lower spray arm upwards.

•

Clean the arms under running water; if necessary use a soft brush for the nozzles.

•

Insert the spray arms again until they clicks into place and tighten the nut of the upper spray

•

arm.

Maintenance of the dishwasher

CAUTION: : : :

CAUTION

Never use spray cleaners to clean the door panel, this may damage the door lock and electrical components.

• Clean the appliance outer surfaces and the door sealing thoroughly with a soft, damp cloth. Use only mild

cleaning agent.

• Use to remove stains inside the appliance a dampened cloth with a little white vinegar or a special deter-

gent for dishwashers. If necessary, fill detergent in and start the appliance without dishware in the program

with the highest rinse temperature.

• Dry the outer surfaces thoroughly before taking in operation again.

A A A A ntifreeze

ntifreeze protection

protection

ntifreeze

protection

If the unit is out of operation and exposed to temperatures below zero, observe the following precautions:

• Disconnect the mains plug.

• Close the water supply and remove the inlet hose from the water valve.

• Drain the water from the inlet hose and the water valve.

• Reconnect the inlet hose to the water valve.

• Turn off the lid of the salt container and take off the filter system. Remove the remaining water in the sump

with an absorbent sponge.

Before you contact an authorized specialist

Problem

Appliance is not working /

starting

the securing nut of

the upper spray and pull off the arm downwards.