Declaration Of Conformity - Emerson SKA1100025 Getting Started Manual

Control Techniques Ltd
The Gro
Newtown
Powys. UK
SY16 3BE
SKA1100025
SKA1200025
SKB1100075
SKB3400037
SKCD200220
SKDD200300
The AC variable speed drive products listed above have been designed and manufactured in
accordance with the following European harmonised standards:
EN 61800-5-1:2007
EN 61800-3:2004
EN 61000-6-2:2005
EN 61000-6-4:2007
EN 61000-3-2:2006
EN 61000-3-3:2008
EN 61000-3-2:2006: Applicable where input current <16A. No limits apply for professional equipment
where input power >1kW.
SKA1200025, SKA1200037, SKA1200055: input choke required
All other units:
EN 61000-3-3:2008: Applicable where input current <16A and supply voltage 230/400V
These products comply with the Low Voltage Directive 2006/95/EC and the Electromagnetic
Compatibility (EMC) Directive 2004/108/EC.
These electronic drive products are intended to be used with appropriate motors,
controllers, electrical protection components and other equipment to form complete end
products or systems. Compliance with safety and EMC regulations depends upon installing
and configuring drives correctly, including using the specified input filters. The drives must
be installed only by professional assemblers who are familiar with requirements for safety
and EMC. The assembler is responsible for ensuring that the end product or system
complies with all the relevant laws in the country where it is to be used. Refer to the
Commander SK Getting Started Guide. An EMC Data Sheet is also available giving detailed
EMC information.
4

Declaration of Conformity

SKA1100037
SKA1200037 SKA1200055
SKB1100110 SKBD200110
SKB3400055 SKB3400075
SKC3400220 SKC3400300
SKD3200400 SKD3400550
Adjustable speed electrical power drive systems - safety requirements -
electrical, thermal and energy
Adjustable speed electrical power drive systems. EMC product standard
including specific test methods
Electromagnetic compatibility (EMC). Generic standards. Immunity
standard for industrial environments
Electromagnetic compatibility (EMC). Generic standards. Emission
standard for industrial environments
Electromagnetic compatibility (EMC), Limits, Limits for harmonic current
emissions (equipment input current <16A per phase)
Electromagnetic compatibility (EMC), Limits, Limitation of voltage
fluctuations and flicker in low-voltage supply systems for equipment with
rated current <16A
www.controltechniques.com
SKA1200075
SKBD200150
SKB3400110
SKC3400400
SKD3400750
for professional use only
T. Alexander
VP Technology
Date: 11th June 2009
Commander SK Getting Started Guide
SKB3400150
Issue Number: 9