YASKAWA PS-A10HB Installation Manual
  1. Manuals
  2. Brands
  3. YASKAWA Manuals
  4. Power Supply
  5. PS-A10HB
  6. Installation manual
YASKAWA PS-A10HB Installation Manual

YASKAWA PS-A10HB Installation Manual

24 v power supply
Hide thumbs Also See for PS-A10HB:
Table of Contents

Advertisement

Quick Links

YASKAWA 1000-Series Option
24 V Power Supply
Installation Manual
Type: PS-A10LB, PS-A10HB
To properly use the product, read this manual thoroughly and retain
for easy reference, inspection, and maintenance. Ensure the end user
receives this manual.
1000
安川
シリーズオプション
24 V
制御電源ユニット
取扱説明書
PS-A10LB, PS-A10HB
形式：
製品を安全にお使い頂くために，本書を必ずお読みください。
また，本書をお手元に保管していただくとともに，最終的に本製品をご使用になる
ユーザー様のお手元に確実に届けられるよう，お取り計らい願います。
MANUAL NO. TOBP C730600 55D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS-A10HB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for YASKAWA PS-A10HB

Summary of Contents for YASKAWA PS-A10HB

  • Page 1 YASKAWA 1000-Series Option 24 V Power Supply Installation Manual Type: PS-A10LB, PS-A10HB To properly use the product, read this manual thoroughly and retain for easy reference, inspection, and maintenance. Ensure the end user receives this manual. 1000 安川 シリーズオプション 24 V 制御電源ユニット...
  • Page 2 Yaskawa. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because Yaskawa is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice.

  • Page 3: Table Of Contents

    7 SPECIFICATIONS ....... 37 YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 4: Preface And Safety

    The selection and application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances should any Yaskawa product be incorporated into any product or design as the exclusive or sole safety control.
  • Page 5 The following conventions indicate safety messages in this manual. Failure to heed these messages could cause fatal injury or damage products and related equipment and systems. DANGER Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 6: General Safety

    • When ordering new copies of the manual, contact a Yaskawa representative or the nearest Yaskawa sales office and provide the manual number shown on the front cover.
  • Page 7 Do not modify the unit or option circuitry. Failure to comply could result in damage to the unit or option and will void warranty. Yaskawa is not responsible for any modification of the product made by the user. This product must not be modified.

  • Page 8: Product Overview

    CIMR-L 5A CIMR-T 2A PS-A10LB T1000A CIMR-T 4A PS-A10HB CIMR-Z 2A PS-A10LB Z1000 CIMR-Z 4A PS-A10HB CIMR-D 2A PS-A10LB D1000 CIMR-D 4A PS-A10HB CIMR-R 2A PS-A10LB R1000 CIMR-R 4A PS-A10HB YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 9: Receiving

    • A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to install the unit and wire the option terminal block. Note: Tools required to prepare option cables for wiring are not listed in this manual. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 10: Option Components

    B – Connector tabs (6) C – Model number F – Option cover D – Charge LED G – Nameplate (Refer to Figure 3 for details.) Figure 2 24 Vdc Power Supply Option Components YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 11 Figure 3 PS-A10LB Nameplate Example ◆ Terminal Block TB1 Refer to Table 2 for details on TB1 terminal functions. Terminal Functions ■ Table 2 Option Terminal Functions Terminal Function +24 Vdc Input Ground YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 12: Installation And Uninstallation Procedure

    Do not touch circuit boards while the power to the unit is on. Failure to comply could result in death or serious injury. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 13 Do not use unshielded cable for control wiring. Failure to comply may cause electrical interference resulting in poor system performance. Use shielded twisted-pair wires and ground the shield to the ground terminal of the unit. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 14 B – 30 mm minimum Figure 4 Correct Installation Spacing Note: IP20/NEMA Type 1 Enclosure and IP00/Open-Chassis models require the same amount of space above and below the unit for installation. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 15 Note: 600 V class drives (models CIMR-A 5 ) are not compliant with European Standards. External Power Supply Use a Class 2 power supply as defined by UL standards for the customer-supplied power supply connection to TB1. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 16 CIMR-D 2A0030 to 2A0130, 4A0030 to 4A0185 CIMR-R 2A0035 to 2A0073, 4A0035 to 4A0150 CIMR-A 4A0515 to 4A1200 CIMR-L 4A0450 and 4A0605 CIMR-Z 4A0414 and 4A0590 CIMR-D 4A0270 to 4A0630 YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 17 Figure Figure 6 Figure 6 Remove the Connector Cover Pull the loose end of the connection cable out of the option. Figure 7 Figure 7 Pull Out the Connection Cable YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 18 Note: Take proper precautions when connecting the option so the option will easily fit onto the unit. Make sure the connector cable is not pinched between the option and the unit. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 19 For Z1000 drives, use the tapping screw included in the package to attach the option. Figure 10 A – Use the tapping screw to attach the option Figure 10 Slide the Option onto the Unit Skip to Option Wiring on page YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 20 Figure 11 Screw Connector cover Figure 11 Remove the Connector Cover Screw Slide the connector cover as shown in Figure Figure 12 Figure 12 Slide the Connector Cover YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 21 Figure 13 Figure 13 Remove the Connector Cover Pull the loose end of the connection cable out of the option. Figure 14 Figure 14 Pull Out the Connection Cable YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 22 Note: Take proper precautions when connecting the option so the option will easily fit onto the unit. Make sure the connector cable is not pinched between the option and the unit. Figure 16 Connector tab Insertion tab Figure 16 Tab Locations YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 23 NOTICE: Use only the screws packaged with the option; other screws may damage unit components. Figure 17 Figure 17 Location of Screws Figure 18 Figure 18 Option Properly Installed Skip to Option Wiring on page YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 24 Phillips screwdriver (M4) to remove the unit covers. Figure 19 A – Front cover 1 C – Terminal cover B – Front cover 2 Figure 19 Remove the Covers YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 25 Figure 20 A – Bracket for option Figure 20 Removing the Bracket (CIMR-A 4A0515, 4A0675) Figure 21 A – Bracket for option Figure 21 Removing the Bracket (CIMR-A 4A0930, 4A1200) YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 26 Figure 22 Pull Out the Connection Cable As shown in Figure 23, the cable and connector should pass through the bracket. Figure 23 Figure 23 Pass the Cable and Connector through the Bracket YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 27 Connect the option to the bracket so that the connector tabs on the unit catch and hold it in place. Figure 24 A – Connector tabs to catch the bracket Figure 24 Connecting the Option to the Bracket YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 28 NOTICE: Make sure the connector is facing in the proper direction when plugging it into the unit. An improper connection can damage the connector and the unit. Figure 26 Figure 26 Plugging the Connector YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 29 Make sure the connector cable is not pinched between the option and the unit. Figure 27 A – Option affixed to the bracket Figure 27 Installing the Option Figure 28 Figure 28 Option Properly Installed YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 30 31. After wiring the terminal TB1, reinstall the unit covers to their original locations. Figure 29 A – Front cover 1 C – Terminal cover B – Front cover 2 Figure 29 Reinstall the Covers to the Unit YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 31 NOTICE: Heat shrink tubing or electrical tape may be required to ensure that cable shielding does not contact other wiring. Insufficient insulation may cause a short circuit and damage the option or unit. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 32: Connection Diagram

    (24 to 17 AWG) 0.25 to 0.5 Shielded 24, 0, FE (1.95 to 2.21) (18 AWG) Single line: (20 AWG) (24 to 20 AWG) cable, etc. 0.25 to 1.5 (24 to 16 AWG) YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 33 CIMR-D 2A0030 to 2A0130, 4A0030 to 4A0185 CIMR-R 2A0035 to 2A0073, 4A0035 to 4A0150 CIMR-A 4A0515 to 4A1200 CIMR-L 4A0450 and 4A0605 CIMR-Z 4A0414 and 4A0590 CIMR-D 4A0270 and 4A0630 YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 34 NOTICE: Do not use excessive force when removing the option. Failure to comply can damage the cable and the connector. NOTICE: For Z1000 drives, first remove the screw used to fasten the option into place. Figure 32 Figure 32 Uninstallation Method A YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 35 Uninstallation Method C ■ After removing the unit covers, remove the bracket and option as shown in Figure Figure 34 A – Remove the bracket and option Figure 34 Uninstallation Method C YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 36: Verifying Operation

    Table 6 Power Supply and Control Circuit Unit Main Circuit Input Control Circuit Power from Option Unit Operation Power Supply Operation in Unit Possible Normal operation Possible Not possible Stop Not possible YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 37: Specifications

    -20°C to +60°C (-4°F to +140°F) allowed for short-term Storage Temperature transport of the product Weight 0.2 kg (0.4 lbs.) Compliance UL, CE <1> The option must be installed in an environment compatible with the unit environmental specifications. YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...

  • Page 38: Revision History

    CIMR-D 2A0005 to 2A0130, A4A0005 to Documentation 4A0630 March 2013 Revision: Reviewed and corrected entire documentation. Back cover Revision: Address July 2012 Back cover Revision: Address − − March 2011 First Edition YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual...
  • Page 39 Phone: 81-3-5402-4502 Fax: 81-3-5402-4580 http://www.yaskawa.co.jp YASKAWA AMERICA, INC. 2121 Norman Drive South, Waukegan, IL 60085, U.S.A. Phone: 1-800-YASKAWA (927-5292) or 1-847-887-7000 Fax: 1-847-887-7310 http://www.yaskawa.com YASKAWA ELÉTRICO DO BRASIL LTDA. Avenida Piraporinha 777, Diadema, São Paulo, 09950-000, Brasil Phone: 55-11-3585-1100 Fax: 55-11-3585-1187 http://www.yaskawa.com.br...

This manual is also suitable for:

Ps-a10lb

Table of Contents