Preparation; Assembly Instructions - Kobalt KSS 2080A-06 Operation Manuals

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 5 minutes

ASSEMBLY INSTRUCTIONS

WARNING
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
1. ASSEMBLING THE SHAFTS
a. Align the pin (E) on the upper handle
assembly (A) with the hole (F) on the lower
handle assembly (B). Insert the upper
handle assembly into the lower handle
assembly until the pin clicks into the hole.
b. Once the two shafts are secured, turn
the lock knob (G) clockwise until it is fully
tightened.
1a
F
1b
9
E
G
A
B