Safety Information & Warnings - ReconRobotics THROWBOT 2 User Manual

World leader in tactical micro-robot systems
Table of Contents

Advertisement

SAFETY INFORMATION & WARNINGS CONTINUED
• Keep the robot and OCU away from children. The
robot and OCU contain small, sharp, and potentially
dangerous parts which may be a safety hazard.
• Do not insert any foreign objects inside the robot or
OCU. This may cause electric shock, fire or system failure.
• To reduce the risk of unauthorized use or frequency
interference, contact ReconRobotics if the robot exhibits
any signs that unauthorized parties may have accessed
the operations frequency; signs include excessive lag
time between commands and mechanical responses or
unexplained mechanical movements.
• Do not immerse the OCU or chargers into water or
liquids. If water or any liquid enters the inside of the
OCU, immediately stop use to avoid electric shock, fire,
or system failure.
• The following symptoms indicate a device may need
technical attention and should not be used:
• After a full charge, the OCU display intermittently
turns ON and OFF.
• The OCU or charger has been dropped and is
malfunctioning.
• There are exposed wires on a charger cable.
• The robot, OCU, or charger becomes too hot to
touch.
• There is an unusual sound, smoke, or burning odor
emitted from any of the components.
• This product emits small amounts of radiation which
may cause cancer, birth defects, or other reproductive
harm. It is the user's responsibility to take the
reasonable care described in the section titled "FCC
RF Radiation Exposure Statement" when using this
product.
• This product may contain Formaldehyde or other
similar substances or chemicals known to cause cancer,
birth defects, or other reproductive harm. It is the user's
responsibility to take reasonable care when using this
product.
If you have questions or concerns regarding the use or
operation of the robot or OCU, discontinue use and contact
ReconRobotics or the vendor from whom you purchased
our equipment.
27

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the THROWBOT 2 and is the answer not in the manual?

Questions and answers

Iman Nobakht
April 22, 2025

Hello, I want to design a recon scout throwbot for a university project. I want to know what material I should use to design the body?

User image 680761beb6e5a

This manual is also suitable for:

Throwbot 2

Table of Contents