Troubleshooting / Frequently Asked Questions - ReconRobotics THROWBOT 2 User Manual

World leader in tactical micro-robot systems
Table of Contents

Advertisement

TROUBLESHOOTING / FREQUENTLY ASKED QUESTIONS

HOW LONG WILL THE ROBOT RUN ON A
FULL CHARGE?
In the default configuration, on a fully charged battery,
the robot should operate for 110 minutes when new in
standard use of driving and observation on flat terrain.
Towing payloads, driving on irregular terrain or up inclines,
driving in the dark (with IR activated) can all affect
battery life.
HOW LONG WILL THE OCU RUN ON A FULL
CHARGE?
The OCU has a runtime of approximately 120 minutes.
HOW MANY TIMES CAN THE ROBOT AND OCU
BE RECHARGED?
The robot and OCU use Lithium Polymer batteries which
are expected to maintain at least 80% of their runtime
after 300 recharge cycles.
HOW LONG DOES IT TAKE TO RECHARGE THE
OCU AND ROBOT?
The recharging times for the OCU and robot will vary
20
depending upon usage and charger. A fully depleted
Throwbot 2 robot or OCU will take approximately 2 hours
to fully charge using the provided chargers. Charging a
Throwbot 2 robot from a charger that does not support
USB Power Delivery or does not supply the recommended
power output may take as long as 10 hours.
THE CHARGE INDICATOR LIGHTS DO NOT
LIGHT UP WHEN THE OCU IS CONNECTED TO
THE BATTERY CHARGER.
Refer to page 13 for instructions on charging.
THE ROBOT OR OCU ARE NOT HOLDING A FULL
BATTERY CHARGE.
If you feel that your system is not running for a complete
battery life on a full charge, try performing this test before
contacting support:
1. Fully charge both devices using the provided
chargers. Ensure that the activation plate is inserted
into the robot and the OCU is switched off during
charging.
2. Activate both devices and run both devices until:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the THROWBOT 2 and is the answer not in the manual?

Questions and answers

Iman Nobakht
April 22, 2025

Hello, I want to design a recon scout throwbot for a university project. I want to know what material I should use to design the body?

User image 680761beb6e5a

Subscribe to Our Youtube Channel

This manual is also suitable for:

Throwbot 2

Table of Contents