TROUBLESHOOTING / FREQUENTLY ASKED QUESTIONS CONTINUED
THE VIDEO STREAM LOSES COLOR FROM
TIME TO TIME.
As the robot reaches the end of video range or in the
presence of other interference, the color from the video
signal may start to disappear. Try moving the OCU closer
to the robot to restore the color.
THE VIDEO STREAM FROM THE ROBOT IS WASHED
OUT, ESPECIALLY IN THE DARK.
When the robot is close to other objects in the dark, the
IR lighting may cause a spot-light effect causing distortion
of the video. This version of the robot will attempt to
automatically detect and lower the IR output in this
scenario, however, it still may result in some washing out.
To alleviate this issue, try backing up the robot slightly or
turning it slightly to aim the "spotlight" away from the
object of interest.
I HAVE A RECON SCOUT XL OR RECON SCOUT CT
WITH A FLEX PACK. CAN I USE THOSE COMPONENTS
WITH MY THROWBOT 2 ROBOT INSTEAD OF
GETTING A DELUXE PACK?
While the larger wheels in the Deluxe Pack may look
similar to the Recon Scout XL wheels in size, they are a
new design. They can be utilized on older Recon Scout XL
or Recon Scout CT robots, but the older Recon Scout XL
wheels from the Recon Scout XL or Flex Pack will not afford
the same drop ratings as the new wheels and should not be
used on a Throwbot 2 robot. Similarly, the wider tail on the
Recon Scout XL or Recon Scout CT may look the same, but
the mounting mechanisms are different and they are not
interchangeable. Finally, the Picatinny Rail from the Recon
Scout CT cannot mount onto the Throwbot 2 robot.
CAN THE ROBOT BE OPERATED IN WET CONDITIONS?
The Throwbot 2 robot system is both IP66 and IP67 rated
which means that it can be sprayed with a hose to clean it
off or submerged for up to 30 minutes in 3 feet (1 meter)
of water. The OCU is not rated for exposure to water and
should be kept dry. The warranty and Annual Maintenance
Plan do not cover any damage resulting from exposure of
the system to water, salt water spray, hazardous or caustic
chemicals, etc.
23
Need help?
Do you have a question about the THROWBOT 2 and is the answer not in the manual?
Questions and answers
Hello, I want to design a recon scout throwbot for a university project. I want to know what material I should use to design the body?