Main Menu - Ignition Xo8 LED Fx Strobe User Manual

7.2 Main menu

Main menu Menu level 2
Meaning
'DMX Address'
'MODE'
Press [MODE] to activate the main menu. Use [UP] or [DOWN] to select a submenu.
When the display shows the desired submenu press [ENTER] to open it up. To close
the main menu, press [MODE]. The stored values are displayed in white in the display.
Changed values are displayed in red until they are confirmed with [ENTER].
All previously made settings are retained even when you disconnect the device from
the power grid. To restart with default values, use the function 'Factory Reset' .
The following table shows the setting options.
Menu level 3
'Set DMX address' 001...512
'DMX Signal Select' Selection of the DMX transmission type
'DMX'
'Wireless DMX'
'DMX Mode' Selecting a DMX mode
'DMX 2 Ch'
'DMX 4 Ch'
'DMX 9 Ch'
'DMX 26 Ch'
'Slave' 'Slave'
'Fading' Fade and stroboscope effects
'Auto Fading'
'Strobe'
'Auto' 'Strobe Program'
Menu level 4
Setting the DMX address
DMX via cable
DMX via radio transmission
2-channel DMX mode
4-channel DMX mode
9-channel DMX mode
26-channel DMX mode
Operating mode 'Slave'
0...255 Automatic Fade effect
0...255 Strobe effect
Stroboscope programme
0...5 No function
6...13 Stroboscope pro-
gramme 1
14...21 Stroboscope pro-
gramme 2
22...29 Stroboscope pro-
gramme 3
30...37 Stroboscope pro-
gramme 4
38...45 Stroboscope pro-
gramme 5
Xo8 LED Fx Strobe IP65 800W
stroboscope
Operating
15