Table of Contents
Advertisement
Installation
Mounting options
Xo8 LED Fx Strobe IP65 800W
10
stroboscope
The quick lock openings on the housing bottom are used for secure attachment of
the supplied Omega brackets. Here you can attach the flight adapters (such as the
supplied C-hooks). The safety rope must pass through the notches on the bottom
case as shown in the following figure.
You can install the unit in hanging or standing position. When in use, the device must
always be attached to a solid surface or an approved truss.
Always work from a stable platform whenever installing, moving or servicing the
unit. In doing so, the area underneath the unit must be cordoned off.
1 Quick lock openings for Omega brackets
2 Openings for safety cable
Advertisement
Table of Contents
