System; Usb Source Setup; Displayport Ver; Hdmi Mode - Samsung C49J890DK Series User Manual

Hide thumbs Also See for C49J890DK Series:
Table of Contents

Advertisement

Chapter 07

System

A detailed description of each function is provided. Refer to your product for details.
― The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality.

USB Source Setup

This option is for assigning correct USB ports for HDMI and DP ports.
― You must assign a correct USB port for each input source to ensure that the USB Switch function works
properly.
― USB-C#1 and USB-C#2 can be regarded as input sources and USB ports. Therefore, it is not necessary to set
up them. The last USB port can only work as a USB port but not as an input source.
― USB-C#1 and DP cannot be displayed at the same time in
― Factory reset does not change these USB port assignments.
― When you assign a USB port, it is not necessary to press the JOG button for confirmation. If you select an
item, it is applied immediately.
PIP/PBP
Mode.

DisplayPort Ver.

Select your DisplayPort version.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the monitor is in
HDMI/DisplayPort/USB Type-C 1/USB Type-C 2
Cable
or power saving mode activates, press the JOG button to display the function-button screen and
then select the
icon. You can select
1.1
or 1.2↑.

HDMI Mode

Select the HDMI mode to use.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the
HDMI Mode
to 1.4, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
― Set the
HDMI Mode
to
1.4
when there is no sound output from the DVD connected to our product.
― Not available when
PIP/PBP Mode
is set to On.
mode and the screen says
Check Signal
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents