Switch Usb - Samsung C49J890DK Series User Manual

Switch USB

PC
HDMI Cable
DP Cable
USB Cable
The KVM (keyboard, video, and mouse) switch enables users to use only a keyboard, a video monitor, and a mouse for controlling multiple input sources.
The function of the Samsung USB switch is as follows:
• When PIP/PBP of a Samsung monitor is on, USB devices (I/O device, USB storage device, etc.) connected to the monitor can be switched between different input sources using the USB switch.
‒ Two different input sources must be connected to the monitor via source ports (HDMI, DP, USB-C#1, USB-C#2), and an upstream USB hub must be correctly connected to the monitor if required.
‒ You must connect USB devices to the Samsung monitor, enable PIP/PBP, and then correctly set up USB hub assignment in the OSD.
• This function can be operated using the USB Switch Shortcut key or the USB Switch item in OSD.
― Each of USB-C#1 and USB-C#2 can be regarded as an upstream USB hub as well as an input source. Therefore, it is unnecessary to set up USB hub assignment for these two ports.
This option is for switching a USB device to a different input source.
― The option is disabled and appears dimmed if
― When a USB device is switched to a source, information about the source including the USB hub port is displayed on the screen.
― The Keyboard and Mouse (KM) switch enables users to interact with and manage up to three input sources using a single mouse and keyboard.
― To prevent data damage or loss, make sure that, before performing
HDMI IN
DP IN
PIP/PBP is Off.
Switch USB, no USB storage devices are being used by the input sources connected to the monitor.
Monitor
PC Screen Laptop/Mobile Phone
Screen
Mobile Phone
USB Type-C Cable
Laptop
USB Type-C Cable
37