Gnss Antenna Power Management; Customising The Start-Up Screen - Leica Zeno 20 User Manual

5.8
Define a Switch-off
Time for the
Antenna
5.9
Using the
"CustomLogoEditor
"
Zeno 20 Windows Embedded Handheld, Software
Step Description
9. To close the network window, tap on the softkey OK.

GNSS Antenna Power Management

In order to save battery power when working in the field, you can define a switch-off
time for the antenna. The antenna automatically switches off when not being used for
the defined length of time.

You can define the switch-off time within StartSettingsSystemGPS
Power Management.
Alternatively, you can control the antenna power within Zeno Field or Zeno
Connect. When disconnecting from the antenna in the Leica Zeno software,
the antenna is switched off automatically to save battery power.

Customising the Start-Up Screen

009177_001
To switch back to the default Leica start-up screen, tap on Delete Logo.
You can customise the start-up screen of the Zeno 20 device
by using the app "CustomLogoEditor.exe". You can find this
app in the folder Windows/CustomLogoEditor.
1)To change the start-up screen, place the desired image file
in a folder on the device.
The image file must meet the following restrictions:
–Width: 480 pixel
–Height: 854 pixel
–File size: max. 410998 byte
–Bit count: 8
–Format: BMP
2)To open the "CustomLogoEditor" app, tap on the
and open the File Explorer. Select Windows/CustomLogoEd-
itor to start the app.
3)To select the image file that you want to install as start-up
screen, tap on Open and browse for the file in the respective
folder.
button
34