1. Manuals
  2. Brands
  3. Leica Manuals
  4. Handhelds
  5. Zeno 10
  6. User manual

Leica Zeno 10 User Manual

Hide thumbs Also See for Zeno 10:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Version 1.0
English
Leica Zeno 10/Zeno 15

User Manual

Advertisement

Table of Contents
loading

Related Manuals for Leica Zeno 10

Summary of Contents for Leica Zeno 10

  • Page 1: User Manual

    Leica Zeno 10/Zeno 15 User Manual Version 1.0 English...
  • Page 2 The type and serial number of your product are indicated on the type plate. identification Enter the type and serial number in your manual and always refer to this information when you need to contact your agency or Leica Geosystems authorised service work- shop. Type: _______________ Serial No.:...
  • Page 3 Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Zeno 10/Zeno 15, Introduction...
  • Page 4 SD is a trademark of the SD Card Association All other trademarks are the property of their respective owners. Validity of this This manual applies to the Zeno 10 and Zeno 15 GNSS/GIS handhelds. Differences manual between the various models are marked and described.
  • Page 5 Zeno GIS Help cation functions. Included are detailed descriptions of special software/hardware settings and soft- ware/hardware functions. * only available as Online Help Refer to the following resources for all Zeno 10/Zeno 15 documentation/soft- ware: • the Leica Zeno GIS DVD •...
  • Page 6 View the service history of your products in Leica Geosystems Service Centers and detailed information on the services performed on your products. For your products that are currently in Leica Geosystems Service Centers view the current service status and the expected end date of service.

  • Page 7: Table Of Contents

    Description of the System Overview Terminology System Concept 1.3.1 Software Concept 1.3.2 Power Concept 1.3.3 Data Storage Concept CS Components 1.4.1 CS10 1.4.2 CS15 Docking Station Components User Interface Keyboard Operating Principles Operation Equipment Setup Zeno 10/Zeno 15, Table of Contents...

  • Page 8: Zeno 10/Zeno 15, Table Of Contents

    Zeno 10/Zeno 15, Table of Contents 3.1.1 Fixing the Display Foil to the CS 3.1.2 Fixing a Hand Strap to the CS 3.1.3 Fixing the Slot Cover to the CS 3.1.4 Setting up as Handheld GNSS 3.1.5 Setting up the Docking Station 3.1.6...
  • Page 9 GS05/GS06 Technical Data 6.2.1 Tracking Characteristics 6.2.2 Accuracy 6.2.3 Technical Data Antennas Technical Data Conformity to National Regulations 6.4.1 CS10 6.4.2 CS15 International Limited Warranty, Software Licence Agreement Appendix A Pin Assignments and Sockets Index Zeno 10/Zeno 15, Table of Contents...

  • Page 10: Description Of The System

    Zeno 10/Zeno 15, Description of the System Description of the System Overview System components GS06 GS05 CS10 CS15 CS_028...

  • Page 11: Terminology

    CS is a collective term describing the various models (CS10/CS15) of the multi- description purpose field controller. Zeno general Zeno is a collective term describing the various models (Zeno 10/Zeno 15) of the description Leica Zeno GNSS/GIS handhelds: • Leica Zeno 10: GNSS/GIS handheld consisting of CS10 field controller and GS05 GNSS cap.
  • Page 12 Zeno 10/Zeno 15, Description of the System CS available models CS10 CS15 Use the supplied stylus on the screens of the touch screen. *1 removable...

  • Page 13: System Concept

    All CS models The software is stored in the flash RAM of the CS field controller. The software can be uploaded onto an Leica SD card, Leica CompactFlash card or a USB stick. Zeno 10/Zeno 15, Description of the System...
  • Page 14 Connect the CS field controller to your PC. Refer to "3.1.6 Connecting to a Personal Computer". • Copy CS firmware file onto a folder on the Leica SD card, Leica CompactFlash card or USB stick. • Tap the Loader icon from the desktop, to run the Loader application.

  • Page 15: Power Concept

    1.3.2 Power Concept General Use the Leica Geosystems batteries, chargers and accessories or accessories recom- mended by Leica Geosystems to ensure the correct functionality of the instrument. Power options Model Power supply all CS models Internally via GEB211/GEB212 battery, or...

  • Page 16: Data Storage Concept

    While other SD cards or CompactFlash cards can be used, Leica Geosystems recommends to only use Leica SD cards or Leica CompactFlash cards and is not responsible for data loss or any other error that can occur while using a non-Leica card.
  • Page 17 Data can be transferred in various ways. Refer to "3.1.6 Connecting to a Personal Computer". CompactFlash cards and SD cards can directly be used in an OMNI drive as supplied by Leica Geosystems. Other PC card drives can require an adaptor. Zeno 10/Zeno 15, Description of the System...

  • Page 18: Cs Components

    Zeno 10/Zeno 15, Description of the System CS Components 1.4.1 CS10 Upside of CS10 a) Slot Cover b) Screen c) Keyboard d) Port cover e) Power socket USB A Host port g) Docking station contacts h) LEMO port (USB and serial)
  • Page 19 Hand strap top clips Slots g) Slot cover h) Stylus GS05 contacts CompactFlash card slot k) SD card slot CS_008 A Bluetooth port is included inside to facilitate connectivity to a digital cellular phone. Zeno 10/Zeno 15, Description of the System...

  • Page 20: Cs15

    Zeno 10/Zeno 15, Description of the System 1.4.2 CS15 Upside of CS15 a) Slot cover b) Screen c) Keyboard d) Port cover e) Power socket USB A Host port g) Docking station contacts h) LEMO port (USB and serial) USB Mini port...
  • Page 21 Hand strap top clips Slots g) Slot cover h) Stylus GS06 contacts CompactFlash card slot k) SD card slot CS_007 A Bluetooth port is included inside to facilitate connectivity to a digital cellular phone. Zeno 10/Zeno 15, Description of the System...

  • Page 22: Docking Station Components

    Zeno 10/Zeno 15, Description of the System Docking Station Components Docking station a) Power socket b) USB port c) Docking station bracket d) Docking station contacts e) GEV223 data cable CS_020...

  • Page 23: User Interface

    User Interface Keyboard Keyboard display CS10 a) Home b) ON/OFF c) Arrow keys, OK d) Fn e) ± key Brightness g) Favourites h) ESC Enter Backspace PQRS WXYZ k) Volume Numeric keys CS_005 Zeno 10/Zeno 15, User Interface...
  • Page 24 Zeno 10/Zeno 15, User Interface Keyboard display CS15 a) Home b) Arrow keys, OK c) ON/OFF d) Fn e) ± key Numeric keys g) Brightness h) Function keys F7 - F12 CAPS Lock Function keys F1 - F6 k) Favourites...
  • Page 25 Switches between the first and second level of function keys. Space Enters a blank. Enter Selects the highlighted line and leads to the next logical menu / dialog. Starts the edit mode for editable fields. Zeno 10/Zeno 15, User Interface...
  • Page 26 Zeno 10/Zeno 15, User Interface Function Opens a selectable list. ON/OFF If CS10/CS15 already off: Turns on CS10/CS15 when held for 2 s. If CS10/CS15 already on: Turns to Power Options menu when held for 2 s. Favourites Goes to a website by simply clicking its name.
  • Page 27 CS field controller. Hold Fn while pressing 0. If keyboard illumination is already off: Turns on keyboard illumination. If keyboard illumination is already on: Turns off keyboard illumination. Zeno 10/Zeno 15, User Interface...

  • Page 28: Operating Principles

    Zeno 10/Zeno 15, User Interface Operating Principles Keyboard and The user interface is operated either by the keyboard or by the touch screen with touch screen supplied stylus. The workflow is the same for keyboard and touch screen entry, the only difference lies in the way information is selected and entered.

  • Page 29: Operation Equipment Setup

    Touch the silver-coloured sticker with two fingers and pull it slowly upwards. The carrier foil is peeling away. Do not peel the carrier foil more than 2 cm - 3 cm away. Zeno 10/Zeno 15, Operation...
  • Page 30 Zeno 10/Zeno 15, Operation Step Description Fix the laid open adhesive underside of the display foil at the display border. Pay attention that the display foil is not fixed between display and display frame. Peel away the carrier foil bit by bit and smooth it out slowly onto the display.

  • Page 31: Fixing A Hand Strap To The Cs

    Take the end of the hand strap and clip it to the base of CS field controller. Compress the clips of the main hook. Lower the main hook onto the pivot knob of the CS field controller. A click can be felt when the clip is secure. Zeno 10/Zeno 15, Operation...
  • Page 32 Zeno 10/Zeno 15, Operation Step Description Adjust the length of the hand strap.

  • Page 33: Fixing The Slot Cover To The Cs

    CS_016 Step Description Press the screwdriver end of the supplied stylus on the quarter-turn screws and loosen them. Remove the slot cover. Reattach the slot cover with the stylus, making sure the quarter-turn screws are seated. Zeno 10/Zeno 15, Operation...

  • Page 34: Setting Up As Handheld Gnss

    Zeno 10/Zeno 15, Operation 3.1.4 Setting up as Handheld GNSS The setup GS05/CS10 is identical to the setup GS06/CS15. For simplicity, the setup GS05/CS10 is used in the following. Attaching the GS05 to the CS10 step-by-step CS_011 Step Description Detach the slot cover from the CS10. Refer to "3.1.3 Fixing the Slot Cover to the CS".
  • Page 35 Attach the GS05 to the CS10. Press the screwdriver end of the supplied stylus on the quarter-turn screws and tighten them. To achieve the optimal satellite tracking performance, mount the AS05 (external GNSS antenna) on the GS05. Zeno 10/Zeno 15, Operation...

  • Page 36: Setting Up The Docking Station

    Zeno 10/Zeno 15, Operation 3.1.5 Setting up the Docking Station Mounting components of the docking station step-by-step CS_027 Step Description Hold the docking station bracket as shown in the illustration in relation to the docking station rack. Slightly press the holder into the docking station rack. A click can be felt...

  • Page 37: Connecting To A Personal Computer

    Insert the Leica Viva Series DVD. Run the SetupViva&GR_USB.exe to install the drivers necessary for Leica Viva devices. The setup has to be run only once for all Leica Viva devices. The Welcome to InstallShield Wizard for Leica Viva & GR USB drivers window appears.
  • Page 38 Zeno 10/Zeno 15, Operation Step Description Install. The drivers will be installed on your PC. For PCs with Windows Vista or Windows 7 operating system: If not already installed, Windows Mobile Device Center will be installed additionally. The InstallShield Wizard Completed window appears.
  • Page 39 The Found New Hardware Wizard starts up automatically a second time. Check Yes, this time only. Next>. Check Install the software automatically (Recommended). Next>. The software for LGS CS USB Device will be installed on your PC. Finish. For PCs with Windows XP operating system: Zeno 10/Zeno 15, Operation...
  • Page 40 Zeno 10/Zeno 15, Operation Step Description Run the ActiveSync installation program if not already installed. Allow USB connections inside the Connection Settings window of Active- Sync. For PCs with Windows Vista or Windows 7 operating system: Windows Mobile Device Center starts up automatically. If does not start automatically, start Windows Mobile Device Center.
  • Page 41 Devices. The folders of the data storage device can be found in StorageCard. For PCs with Windows Vista or Windows 7 operating system: Windows Mobile Device Center starts up automatically. If does not start automatically, start Windows Mobile Device Center. Zeno 10/Zeno 15, Operation...

  • Page 42: Power Functions

    Zeno 10/Zeno 15, Operation Power Functions Turning CS field Press and hold power key ( ) for 2 s. controller on CS field controller must have a power supply. Power Options Press and hold power key ( ) for 2 s to open Power Options menu.
  • Page 43 Reset Windows CE (resets Windows CE and communication settings to factory defaults) • Reset installed software (resets settings of all installed software) • Reset Windows CE and installed software (resets Windows CE and settings of all installed software) Zeno 10/Zeno 15, Operation...

  • Page 44: Batteries

    +10°C to +20°C/+50°F to +68°F if possible. • It is normal for the battery to become warm during charging. Using the chargers recommended by Leica Geosystems, it is not possible to charge the battery if the temperature is too high. •...

  • Page 45: Changing The Battery

    Push the slide fastener in the direction of the arrow with the open-lock symbol. Open the battery compartment. Pull the battery from the battery compartment. Place the battery into the battery compartment with the Leica logo facing to the top. Zeno 10/Zeno 15, Operation...
  • Page 46 Zeno 10/Zeno 15, Operation Step Description Close the battery compartment by pushing the slide fastener in the direc- tion of the arrow with the close-lock symbol.

  • Page 47: Charging The Battery

    (A) or the docking station (B) and an A/C plug. The power LED on the CS field controller switches on. When CS field controller’s battery is fully charged the LED switches off again. Refer to "LED indicators" for information about the power LED. Zeno 10/Zeno 15, Operation...
  • Page 48 Using the product after incorrect attempts were made to carry out repairs Precautions: Do not open the product. Only Leica Geosystems authorised service workshops are entitled to repair these products. The following advice is only valid for batteries, power adapter or docking station.

  • Page 49: Working With The Memory Device

    Do not bend the card. • Protect the card from direct impacts. Failure to follow these instructions could result in data loss and/or permanent damage to the card. Insert and remove a CompactFlash card step-by-step CS_017 Zeno 10/Zeno 15, Operation...
  • Page 50 Zeno 10/Zeno 15, Operation Step Description The CompactFlash card is inserted into a slot inside the top of the CS10/CS15. Refer to "Fixing the slot cover to the CS step-by-step". Loosen the screws inside the slot cover on top of the CS10/CS15 using the screwdriver end of the stylus.
  • Page 51 Detach the slot cover from the CS10/CS15. Slide the card firmly into the slot until it clicks into position. Do not force the card into the slot. The card must be held with the contacts facing the slot. Zeno 10/Zeno 15, Operation...
  • Page 52 Zeno 10/Zeno 15, Operation Step Description Attach the slot cover and tighten the screws. To remove the card, detach the slot cover of the CS10/CS15. Gently press the top of the card to release it from the slot. Remove the SD card and attach the slot cover.

  • Page 53: Led Indicators On Cs10/Cs15

    LED Indicators on CS10/CS15 LED indicators Description The CS field controller has Light Emitting Diode indicators. They indicate the basic field controller status. Diagram a) Bluetooth LED b) Power LED CS_023 Zeno 10/Zeno 15, Operation...
  • Page 54 Zeno 10/Zeno 15, Operation Description of the LEDs IF the THEN Bluetooth green Bluetooth is in data mode and ready for connecting. purple Bluetooth is connecting. blue Bluetooth has connected. flashing blue data is being transferred Power LED power is off.
  • Page 55 IF the THEN flashing red power is very low. The battery is being charged. Zeno 10/Zeno 15, Operation...

  • Page 56: Using The Digital Camera

    Zeno 10/Zeno 15, Operation Using the Digital Camera Overview Both CS field controllers are equipped with a digital camera located at the underside (refer to "1.4 CS Components"). If a hand strap or pole holder plate is mounted, the camera view is not limited. The camera application can be started from the desktop icon Camera or from the Start menu Start - Programs - Camera.
  • Page 57 Browse to the desired folder or create a new one. Name the picture. Press OK to save it and return to the camera view. Press Cancel to reject the picture and to return to the camera view without saving the picture. Zeno 10/Zeno 15, Operation...

  • Page 58: Care And Transport

    Always carry the product in its transport container and secure it. Shipping When transporting the product by rail, air or sea, always use the complete original Leica Geosystems packaging, transport container and cardboard box, or its equiva- lent, to protect against shock and vibration. Shipping, transport...

  • Page 59: Storage

    Protect batteries from damp and wetness. Wet or damp batteries must be dried before storing or use. • A storage temperature range of -20°C to +30°C/-4°F to 86°F in a dry environ- ment is recommended to minimise self-discharging of the battery. Zeno 10/Zeno 15, Care and Transport...

  • Page 60: Cleaning And Drying

    Zeno 10/Zeno 15, Care and Transport Cleaning and Drying Product and • Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth accessories with water or pure alcohol. Do not use other liquids; these may attack the polymer components.

  • Page 61: Safety Directions General Introduction

    The following directions enable the person responsible for the product, and the person who actually uses the equipment, to anticipate and avoid operational hazards. The person responsible for the product must ensure that all users understand these directions and adhere to them. Zeno 10/Zeno 15, Safety Directions...

  • Page 62: Intended Use

    Zeno 10/Zeno 15, Safety Directions Intended Use Permitted use • Remote control of product. • Data communication with external appliances. Adverse use • Use of the product without instruction. • Use outside of the intended limits. • Disabling safety systems.
  • Page 63 It is the task of the person responsible for the equipment to inform the user about hazards and how to counteract them. The product is not to be operated until the user has been instructed on how to work with it. Zeno 10/Zeno 15, Safety Directions...

  • Page 64: Limit Of Use

    Zeno 10/Zeno 15, Safety Directions Limits of Use Environment Suitable for use in an atmosphere appropriate for permanent human habitation: not suitable for use in aggressive or explosive environments. Danger Local safety authorities and safety experts must be contacted before working in hazardous areas, or close to electrical installations or similar situations by the person in charge of the product.

  • Page 65: Responsibilities

    Manufacturers The manufacturers of non Leica Geosystems accessories for the product are respon- of non Leica sible for developing, implementing and communicating safety concepts for their...
  • Page 66 Zeno 10/Zeno 15, Safety Directions Warning The person responsible for the product must ensure that it is used in accordance with the instructions. This person is also accountable for the training and the deployment of personnel who use the product and for the safety of the equipment in use.

  • Page 67: Hazards Of Use

    Precautions: Keep at a safe distance from electrical installations. If it is essential to work in this environment, first contact the safety authorities responsible for the electrical instal- lations and follow their instructions. Zeno 10/Zeno 15, Safety Directions...
  • Page 68 Zeno 10/Zeno 15, Safety Directions Warning During dynamic applications, for example stakeout procedures there is a danger of accidents occurring if the user does not pay attention to the environmental condi- tions around, for example obstacles, excavations or traffic. Precautions: The person responsible for the product must make all users fully aware of the existing dangers.
  • Page 69 Precautions: Do not use the product in a thunderstorm. Warning Using a battery charger not recommended by Leica Geosystems can destroy the batteries. This can cause fire or explosions. Precautions: Only use chargers recommended by Leica Geosystems to charge the batteries.
  • Page 70 Using the product after incorrect attempts were made to carry out repairs Precautions: Do not open the product. Only Leica Geosystems authorised service workshops are entitled to repair these products. The following advice is only valid for batteries, power adapter or docking station.
  • Page 71 By disposing of the product irresponsibly you may enable unauthorised persons to use it in contravention of the regulations, exposing themselves and third parties to the risk of severe injury and rendering the environment liable to contamination. Zeno 10/Zeno 15, Safety Directions...
  • Page 72 Always prevent access to the product by unauthorised personnel. Product-specific treatment and waste management information can be downloaded from the Leica Geosystems home page at http://www.leica-geosystems.com/treatment or received from your Leica Geosystems dealer. Warning Only Leica Geosystems authorised service workshops are entitled to repair these products.

  • Page 73: Electromagnetic Compatibility Emc

    Electromagnetic radiation can cause disturbances in other equipment. Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment may be disturbed. The product is a class A product when operated with the internal batteries. In a...
  • Page 74 Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that the product may be disturbed by intense electromagnetic radiation, for example, near radio transmitters, two-way radios or diesel generators.
  • Page 75 Precautions: Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment can be disturbed or that humans or animals can be affected. •...

  • Page 76: Fcc Statement, Applicable In U.s

    Zeno 10/Zeno 15, Safety Directions FCC Statement, Applicable in U.S. The greyed paragraph below is only applicable for products without radio. Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
  • Page 77 Warning Changes or modifications not expressly approved by Leica Geosystems for compli- ance could void the user's authority to operate the equipment. Labelling CS10 CS_014 Labelling CS15 CS_015 Zeno 10/Zeno 15, Safety Directions...
  • Page 78 Zeno 10/Zeno 15, Safety Directions Labelling GS05, GS06 CS_012 Labelling internal This device complies with part 15 of the FCC Rules. Operation battery GEB211, is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device...

  • Page 79: Technical Data

    Keyboard: 65 keys including 12 function keys, illumination Touch screen: Toughened film on glass Sound: Integrated sealed speaker and microphone Digital camera: Resolution: 1600 x 1200 pixels, fixed focus lens, image capture: JPEG Zeno 10/Zeno 15, Technical Data...
  • Page 80 Zeno 10/Zeno 15, Technical Data Dimensions Type Length [m] Width [m] Thickness [m] CS10 0.200 0.102 0.045 CS15 0.245 0.125 0.045 Weight Type Weight [kg]/[lbs] CS10, with battery 0.688/1.517 CS15, with battery 0.838/1.847 Recording Data can be recorded on the SD card, CompactFlash card, USB stick or in the internal memory.
  • Page 81 Storage temperature [°C] CS10/CS15 -30 to +60 -40 to +80 Internal -20 to +55 -40 to +70 battery Protection against water, dust and sand Type Protection CS10/CS15 IP67 (IEC60529) Dust tight Waterproof to 1 m temporary immersion Zeno 10/Zeno 15, Technical Data...
  • Page 82 Zeno 10/Zeno 15, Technical Data Humidity Type Protection CS10/CS15 Up to 100 % The effects of condensation are to be effectively counteracted by periodically drying out CS10/CS15. Interfaces Type RS232 USB Host USB OTG Bluetooth CS10/CS15 LEMO port or LEMO port or...
  • Page 83 Ports Type 8 pin LEMO-1 DSUB9 USB A USB Mini Docking Host station contacts CS10/CS15 For power and/or For communication For power communication and/or commu- nication Zeno 10/Zeno 15, Technical Data...

  • Page 84: Gs05/Gs06 Technical Data

    Zeno 10/Zeno 15, Technical Data GS05/GS06 Technical Data 6.2.1 Tracking Characteristics Instrument SmartTrack+ technology Satellite reception Single frequency GS05/GS06: Up to 14 channels continuous tracking on L1 (GPS); up to 14 Instrument channels continuous tracking on L1 (GLONASS); one channel channels tracking SBAS.
  • Page 85 Carrier phase and code measurements on L1 (GPS) are fully independent with AS on or off. GS05/GS06: Up to 14 simultaneously on L1 (GPS) + up to 14 simultaneously Satellites tracked on L1 (GLONASS) + up to one SBAS Zeno 10/Zeno 15, Technical Data...

  • Page 86: Accuracy

    Zeno 10/Zeno 15, Technical Data 6.2.2 Accuracy Accuracy is dependent upon various factors including the number of satellites tracked, constellation geometry, observation time, ephemeris accuracy, ionospheric disturbance, multipath and resolved ambiguities. The following accuracies, given as root mean square, are based on measurements processed using LGO and on real-time measurements.
  • Page 87 L1 GPS, GLONASS SmartTrack+ With CS15 field controller. antenna. Dimensions Type Length [m] Width [m] Thickness [m] Zeno 10 (GS05 0.278 0.102 0.045 with CS10) Zeno 15 (GS06 0.323 0.125 0.045 with CS15) Connector 5 pin interface port Zeno 10/Zeno 15, Technical Data...
  • Page 88 Zeno 10/Zeno 15, Technical Data Weight Type Weight [kg]/[lbs] Zeno 10 (GS05 with CS10) 0.750/1.653 Zeno 15 (GS06 with CS15) 0.910/2.006 Power consumption: 0.5 W typically, 45 mA Power External supply voltage: Nominal 12 V DC ( ), voltage range 5 V-28 V DC...
  • Page 89 IP67 (IEC 60529) Dust tight Protected against water jets Waterproof to 1 m temporary immersion Humidity Protection Up to 100 % The effects of condensation are to be effectively counteracted by periodically drying out the antenna. Zeno 10/Zeno 15, Technical Data...

  • Page 90: Antennas Technical Data

    Zeno 10/Zeno 15, Technical Data Antennas Technical Data Description and The table gives a description and the intended use of the antenna. Type Description AS05 L1 GPS, GLONASS SmartTrack+ With CS10/GS05, CS15/GS06. antenna with built-in ground plane. Dimensions Type AS05 Height 6.2 cm...
  • Page 91 Environmental Temperature specifications Type Operating temperature [°C] Storage temperature [°C] AS05 -40 to +70 -55 to +85 Protection against water, dust and sand Type Protection AS05 IP67 (IEC 60529) Dust tight Protected against water jets Zeno 10/Zeno 15, Technical Data...
  • Page 92 Zeno 10/Zeno 15, Technical Data Type Protection Waterproof to 1 m temporary immersion Humidity Type Protection AS05 Up to 100 % The effects of condensation are to be effectively counter- acted by periodically drying out the antenna. Cable length Separation distance...

  • Page 93: Conformity To National Regulations

    Conformity • FCC Part 15 (applicable in US) • Hereby, Leica Geosystems AG, declares that the product CS10 is in compliance to national with the essential requirements and other relevant provisions of Directive regulations 1999/5/EC. The declaration of conformity can be consulted at http://www.leica-geosystems.com/ce.
  • Page 94 Zeno 10/Zeno 15, Technical Data Frequency band Type Frequency band [MHz] CS10, Bluetooth 2402 - 2480 Output power Type Output power [mW] CS10, Bluetooth Antenna Type Antenna Gain [dBi] Connector Frequency band [MHz] CS10, Bluetooth Integrated antenna GS05 Internal GNSS...
  • Page 95 • FCC Part 15 (applicable in US) Conformity • Hereby, Leica Geosystems AG, declares that the product CS15 is in compliance to national with the essential requirements and other relevant provisions of Directive regulations 1999/5/EC. The declaration of conformity can be consulted at http://www.leica-geosystems.com/ce.
  • Page 96 Zeno 10/Zeno 15, Technical Data Output power Type Output power [mW] CS15, Bluetooth Antenna Type Antenna Gain [dBi] Connector Frequency band [MHz] CS15, Bluetooth Integrated antenna GS06 Internal GNSS antenna element (receive only)

  • Page 97: International Limited Warranty, Software Licence Agreement

    Leica Geosystems. Such software is protected by copy- right and other laws and its use is defined and regulated by the Leica Geosystems Software Licence Agreement, which covers aspects such as, but not limited to, Scope of the Licence, Warranty, Intellectual Property Rights, Limitation of Liability, Exclusion of other Assurances, Governing Law and Place of Jurisdiction.
  • Page 98 You must not install or use the software unless you have read and accepted the terms and conditions of the Leica Geosystems Software Licence Agreement. Installa- tion or use of the software or any part thereof, is deemed to be an acceptance of all the terms and conditions of such Licence Agreement.
  • Page 99 DSUB9 port b) USB Mini port c) USB A Host port CS_022 Ports at the instrument bottom panel - Lemo connector a) Lemo port (USB and serial) b) USB A Host port CS_021 Zeno 10/Zeno 15, Pin Assignments and Sockets...
  • Page 100 Zeno 10/Zeno 15, Pin Assignments and Sockets Pin assignments Signal Name Function Direction for RS232 serial Not connected port RS232, receive data RS232, transmit data PIN_002 Not connected Signal Ground Not connected RS232, request to send RS232, clear to send...
  • Page 101 Identification pin In or out Power input, 10.5 V-28 V TRM_ON/USB_ID RS232, general purpose signal In or out 9 pin RS232: RS232, 9 pin, DE9 Sockets 8 pin LEMO-1: LEMO-1, 8 pin, LEMO EGI.1B.308.CLN Zeno 10/Zeno 15, Pin Assignments and Sockets...
  • Page 102 Zeno 10/Zeno 15, Index Index ActiveSync ............37 Antennas ............90 Operating Temperature ......... 91 Storing Temperature ........91 Type .............. 90 Batteries Charge in CS10/CS15 ........47 Charging, first-time use ......... 44 Operation, Discharging ........44 Battery Change in CS10/CS15 ........45 Charge in CS10/CS15 ........
  • Page 103 Description of the system ........10 Operating principles ........28 Digital Camera .............56 Power Options menu ........42 Dimensions System components ........10 Antennas ............90 Unlock keyboard ..........42 SmartAntenna ..........87 Display foil ............29 Docking Station Components ...........22 Mounting ............36 Zeno 10/Zeno 15, Index...
  • Page 104 Zeno 10/Zeno 15, Index Documentation ............. 4 GS06 Drive Operating Temperature ........89 PC card, on office computer ......17 Storage Temperature ........89 Electrical Data Hand strap ............31 GS05 ............. 88 Handheld GNSS ...........34 GS06 ............. 88 Electrical data, antennas ........91...
  • Page 105 Memory device Home ............26 Available ............16 Hot keys ............25 Microsoft ActiveSync ...........37 Numeric keys ..........25 Mount, antennas ..........90 OK ..............26 ON/OFF ............26 SPACE key ............25 Operating Temperature Antennas ............91 CS10 ..............81 Zeno 10/Zeno 15, Index...
  • Page 106 Zeno 10/Zeno 15, Index CS15 .............. 81 GEB211 (internal battery) ......81 Safety Directions ..........61 GEB212 (internal battery) ......81 Screen brightness GS05 ............. 89 Decrease ............27 GS06 ............. 89 Increase ............27 SD card Insert .............51 PC card drive on office computer ......17 Memory device ..........16...
  • Page 107 Increase ............27 Internal battery GEB212 ......... 81 Ports .............. 83 Power supply ..........80 Weight Weight ............80 Antennas ............90 Temperature range GS05 ..............88 Product, drying ..........60 GS06 ..............88 Temperature, charging internal battery ....44 Zeno 10/Zeno 15, Index...
  • Page 108 Zeno 10/Zeno 15, Index Windows CE Reset registry ..........43 Restart ............43 Windows Mobile Device Center ......37 Zeno Available models ..........11 Zeno 10 ............4, 11 Zeno 15 ............4, 11...
  • Page 109 Zeno 10/Zeno 15, Index...
  • Page 110 International Standards of Quality Management and Quality Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001). Ask your local Leica Geosystems dealer for more information about our TQM program. Leica Geosystems AG Heinrich-Wild-Strasse...

This manual is also suitable for:

Zeno 15

Table of Contents