Mini HARDTOP 2 DOOR 2018 Owner's Manual page 49

Function
Enlarge/shrink
map.
Touchpad
General information
Some functions of the Central Information
Display (CID) can be operated using the
touchpad on the Controller:
Selecting functions
1. "My MINI"
2. "System settings"
3. "Touchpad"
4. Select the desired function.
– "Speller": enter letters and numbers.
– "Map": using the map.
– "Search fields": write letters without
selecting the list field.
– "Audio feedback": pronounces en-
tered letters and numbers.
Entering letters and numbers
Entering letters requires some practice at
the beginning. When entering, pay atten-
tion to the following:
– The system distinguishes between up-
per and lower-case letters and numbers.
To make entries, it may be necessary to
change between upper and lower-case
letters, numbers and characters, refer to
page 47.
– Enter characters as they are displayed
on the Control Display.
– Always enter associated characters,
such as accents or periods so that the
letter can be clearly recognized. The set
language determines what input is pos-
Central Information Display (CID)
Operation
Drag in or out with the
fingers.
Online Edition for Part no. 01402723718 - VI/18
sible. Where necessary, enter special
characters via the Controller.
– To delete a character, swipe to the left
on the touchpad.
– To enter a blank space, swipe to the
right in the center of the touchpad.
– To enter a hyphen, swipe to the right in
the upper area of the touchpad.
– To enter an underscore, swipe to the
right in the lower area of the touchpad.
Using the map
The map in the navigation system can be
moved via the touchpad.
Function Operation
Move map. Swipe in the appropriate
direction.
Enlarge/ Drag in or out on the
shrink map. touchpad with fingers.
Display menu. Tap once.
Programmable memory but-
tons
General information
The Central Information Display (CID) func-
tions can be stored on the programmable
memory buttons and called up directly, for
instance radio stations, navigation destina-
tions, phone numbers and menu entries.
Settings are stored for the driver profile
currently used.
Storing a function
1. Select the function via the Central Infor-
mation Display (CID).
2. Press and hold the desired but-
ton, until a signal sounds.
AT A GLANCE
49