Mini HARDTOP 2 DOOR 2018 Owner's Manual page 167

Camera
The camera is installed near the interior
mirror.
Keep the windshield in front of the interior
mirror clean and clear.
Switching on/off
Switching on automatically
The system is automatically active after ev-
ery driving off.
Switching on/off manually
Press button briefly:
– The menu for the intelligent
safety system is displayed. The
systems are individually
switched off according to their
respective settings.
– LED lights up orange or goes out respec-
tive to their individual settings.
Adjust as needed. The individual settings
are stored for the driver profile currently in
use.
Press button again:
– All Intelligent Safety systems
are switched on.
– The LED lights up green.
Hold down button:
– All Intelligent Safety systems
are switched off.
Online Edition for Part no. 01402723718 - VI/18
Safety
– The LED goes out.
Setting the warning time
The warning time can be set via the Central
Information Display (CID).
1. "My MINI"
2. "Vehicle settings"
3. "Intelligent Safety"
4. "Warning time"
5. Select the desired setting.
The selected warning time is stored for the
driver profile currently in use.
Warning with braking function
Display
A warning symbol appears in the instru-
ment cluster and in the Head-up Display if a
collision with a detected vehicle is immi-
nent.
Symbol Measure
Symbol lights up red: prewarn-
ing.
Brake and increase distance.
Symbol flashes red and an
acoustic signal sounds: acute
warning.
Brake and make an evasive ma-
neuver, if necessary.
Prewarning
This warning is issued, for instance when
there is the impending danger of a collision
or the distance to the vehicle ahead is too
small.
The driver must intervene actively when
there is a prewarning.
CONTROLS
167