Husqvarna 545RXT AutoTune Operator's Manual page 11

4. Tighten the knob.
To assemble the cutting equipment
The cutting equipment includes a cutting attachment and
a cutting attachment guard.
WARNING: Use protective gloves.
WARNING: Always use the cutting
attachment guard that is recommended for
the cutting attachment. See
page 28 .
WARNING: An incorrectly attached cutting
attachment can result in injury or death.
To attach and remove the guard extension
The guard extension is used on the combination guard.
Attach the guard extension when you use a trimmer
head or plastic blades. Remove the extension guard
when you use a grass blade.
1. Put the guide on the guard extension into the slot on
the combination guard. Click the 4 locking hooks into
position.
2. Release the locking hooks with the spark plug
wrench to remove the guard extension.
171 - 001 - 20.10.2017
To attach the grass blade and the grass blade
guard/combination guard
1. Put the blade guard/combination guard (A) onto the
Accessories on
2. Make sure that the guard extension is removed.
3. Turn the output shaft to align one of the holes in the
4. Put the locking pin (C) in the hole to lock the shaft.
5. Put the grass blade (D), the support cup (E) and the
6. Make sure that the drive disc and support flange
7. Attach the nut (G).
shaft and tighten the bolt to attach it.
drive disc (B) with the related hole in the gear
housing.
support flange (F) on the output shaft.
D
C
A
engages correctly in the centre hole of the grass
blade.
A
G
E
F
B
11