Advertisement
H -
Installation instructions.
INFORMATION FOR THE INSTALLER
THE GRAB HANDLES MUST BE USED TO MOVE THE OVEN.
WHEN THE OVEN IS HALF FITTED IN THE CABINET, IT IS POSSIBLE TO REMOVE THE TWO
HANDLES BY UNSCREWING THE FOUR FIXING SCREWS.
DO NOT LIFT OVEN BY THE FRONT DOOR AS THIS WILL DAMAGE THE OVEN
WARNING:
Installation must comply with Standards North America (within North America) wiring rules, as well as
your local electrical and building codes and regulations and any other applicable requirements. Your
appliance must be properly installed and grounded by a qualified and licensed technician.
Incorrect installation of the appliance, resulting from the kitchen maker not following the detailed
installation specifications, can affect the appliance performance. Ovens incorrectly installed may
invalidate the warranty and we strongly recommend that the oven cavity and venting be prepared, as
described, in the following specifications. This is critical to appearance, oven performance and safety.
Measurements
Please note that all dimensions provided are in millimeters (mm.) The sizes allow for only a small degree
of error so all cut-outs must be precise and square. To ensure the cabinet is well finished, the cut edges
must also be square and care taken to ensure the cut edges are free of chips.
21
Advertisement
