Additional Data; Restoring The Factory Settings - Roland VGA-3 Owner's Manual

Additional Data

Restoring the Factory Settings

The data created up to the point when the factory settings are restored is lost.
When Restoring All Settings to
Their Factory Settings
You can reinitialize the content of the VGA-3's forty
memories, GK Setup settings, and the SYSTEM Setup
settings to their original factory settings.
1. Hold down [WRITE] while you switch ON the POWER
switch.
MEMORY [1] flashes, while MEMORY [2] and [3]
remain lit.
fig.0230
Flash
* If you want to cancel the reset, turn the power off.
2. If you want to continue and reinitialize the data, press
[WRITE] two times.
The [WRITE] indicator flashes, and when the settings are
completed, the VGA-3 returns to MEMORY Number 1.
When Restoring Only the Memories
to Their Factory Settings
1. Hold down [WRITE] while you switch ON the POWER
switch.
MEMORY [1] flashes, while MEMORY [2] and [3]
remain lit.
2. Press MEMORY button [2].
MEMORY [2] flashes, while MEMORY [1] and [3]
remain lit.
fig.0240
Lit
* If you want to cancel the reset, turn the power off.
Lit Lit
Flash Lit
3. If you want to continue and reinitialize the data, press
[WRITE] two times.
The [WRITE] indicator flashes, and when the settings are
completed, the VGA-3 returns to MEMORY Number 1.
When Restoring GK Setup settings and SYSTEM
Setup Settings to Their Factory Settings
1. Hold down [WRITE] while you switch ON the POWER
switch.
MEMORY [1] flashes, while MEMORY [2] and [3]
remain lit.
fig.0230
2. Press MEMORY button [3].
MEMORY [3] flashes, while MEMORY [1] and [2]
remain lit.
fig.0250
Lit
* If you want to cancel the reset, turn the power off.
3. If you want to continue and reinitialize the data, press
[WRITE] two times.
The [WRITE] indicator flashes, and when the settings are
completed, the VGA-3 returns to MEMORY Number 1.
Lit Flash
27