Ns Threshold Setting; Foot Sw (Fs1/Fs2) Setting; Exp Pedal Mode Setting; Exp Pedal Hold Setting - Roland VGA-3 Owner's Manual

NS THRESHOLD Setting

This sets how much of the internal noise suppressor is
applied.
The noise suppressor is an effect that reduces guitar-
generated noise and hum.
1. Rotate [AMP TYPE] to select
"AMERICAN CLEAN" (NS THRESHOLD).
2. Press a MEMORY button [1]–[10] to set the amount of
effect.
Memory button
[1]–[10] 0 (Off)–9

FOOT SW (FS1/FS2) Setting

This selects the action for the foot switch (BOSS FS-5U;
optional) connected to the FOOT SW jack.
1. Rotate [AMP TYPE] to select
"TWEED" (FOOT SW (FS1/FS2) ).
2. Press MEMORY button [1], [2], [3], or [4] to select the
function for the foot switch.
Memory button
[1] EFX/DELAY
FS1: Switchng the EFX on/off
FS2: Switchng the Delay on/off
MEMORY ▼/▲
[2]
FS1: Memory number down
FS2: Memory number up
[3] TAP/DELAY
FS1: Tap input
FS2: Switchng the Delay on/off
[4] MANUAL/TUNER
FS1:
Switching the Manual/Memory mode
FS2:
Switchng the Tuner on/off
* When a single foot switch is connected with one cable to the
FOOT SW jack, the switch is used for FS1 function.
Setting
Setting
Making the SYSTEM Settings (SYSTEM Setup)

EXP PEDAL MODE Setting

This selects the pedal function when an expression pedal is
connected.
1. Rotate [AMP TYPE] to select
"BRITISH" (EXP PEDAL MODE).
2. Press MEMORY button [1], [2], or [3] to select the
function for the expression pedal.
Memory button
[1] VOLUME/GK/WAH
• When GUITAR TYPE is set to
SYNTH LEAD or SYNTH PAD,
the pedal controls the filter.
• When WAH is selected for EFX,
it functions as a wah pedal.
• With all other settings, it functions
as a volume pedal.
[2] GK/WAH
• When GUITAR TYPE is set to
SYNTH LEAD or SYNTH PAD,
the pedal controls the filter.
• When WAH is selected for EFX,
it functions as a wah pedal.
[3] VOLUME
The pedal functions as a volume
pedal at all times.

EXP PEDAL HOLD Setting

This selects the action for the expression pedal when
switching memories.
1. Rotate [AMP TYPE] to select
"MATCH" (EXP PEDAL HOLD).
2. Press MEMORY button [1] or [2] to select the function
for the expression pedal.
Memory button
[1] ON
When memories are switched, the
volume (setting) will be as specified
by the position of the pedal.
[2] OFF
When memories are switched, the
level settings stored in the memories
are used, regardless of the pedal
position.
The pedal functions as an expres-
sion pedal as soon as it is adjusted.
Setting
Setting
25