Changing The Frequency Channel - scope F-LINK MK4 Installation Manual

2.1.3 Changing the frequency channel

Use the DIP switches on the F-Link circuit board to select the required frequency channel. The F-Link will detect
the change and reboot, displaying the selected frequency. All F-Links on a system must be set to use the same
frequency channel.
Ref: FLNK4red
F-Link Mk4 Supervised Transceiver System
If an unavailable channel is selected (e.g. channel 26), the
F-Link will automatically use the closest available channel.
The actual frequency in use is displayed each time the
F-Link reboots.
Page 6 of 23
Issue 1