Table of Contents
Advertisement
Chapter 8 Creating and Editing Songs
■ Transposing Individual Parts
(Transpose)
You can transpose specified parts and tracks individually.
At Step 3 of "Selecting the Editing Function" (p. 145), select
<Transpose>.
A screen like the one shown below appears.
fig.d-e-trans.eps_50
Item
Measure number of the first measure of the
From
segment to be transposed
Number of measures to be transposed
For
Track button or part number to be transposed
Tr/Pt
When "All" is selected, the same portion of all
parts is transposed.
The range of transposition
You can select the range to transpose the data,
Bias
from -24 (two octaves down) to +24 (two
octaves up), adjustable in semitones.
* You cannot transpose performances of the drum sets and
sound effect sets (such as the Rhythm Track).
148
Content
■ Making Measures Blank
(Erase)
You can delete the performance data in a specified block of
measures, turning them into blank measures without
reducing the length of the song. This process is called
"erasing."
fig.e_erase.e
Ex. To erase measures (bars) 5-8
1
2
3
4
5
1
2
3
4
5
Blank measures
Follow the steps in "Selecting the Editing Function" (p. 145)
to choose <Erase>.
A screen like the one shown below appears.
fig.d-e-erase.eps_50
Item
Measure number of the first measure of the
From
segment to be erased
For
Number of measures to be erased
Track button or part number to be erased
Tr/Pt
When "All" is selected, the same portion of all
parts is erased.
Select from the following types of performance
data to erase:
All
All performance data, including notes, tempos,
tones switches, volume changes, etc., are erased.
Tempo
Tempo data is erased. Erasing the tempo data for
all measures results in a single, constant tempo.
Event
Prog.Change
Erases the data for switching Tones (p. 145).
Note
Erases only notes.
Except Note
Erases all of the performance data except for the
notes.
6
7
8
9
10
6
7
8
9
10
Content
Advertisement
Table of Contents
