Roland KR117/115 Owner's Manual page 78

Chapter 3 Song Playback
Insert the CD in the CD Drive
1.
Press the eject button and open a disc tray.
fig.
2.
Put a CD on a disc tray.
3.
Press the eject button again to close the disc tray.
Removing a CD
1.
Press the eject button and open a disc tray.
2.
Remove the CD from the disc tray.
If a disc tray does not open
If the power is turned off with the disc still in the drive (such as due to a power
failure), the disc tray cannot be opened by pressing the eject button. In this case, you
can insert a piece of wire to force the tray open.
fig.
Make sure the KR's power has been turned OFF before attempting to engage the
emergency eject hole. If you insert something while the power is on, the disc could
be damaged, or unexpected problems may occur.
78
Disc Tray
Eject Button
Emergency Eject Hole