Table of Contents
Advertisement
Chapter 5 Recording and Saving the Performance
Start Recording
6.
Press the [
A two-bar count-in plays, then recording starts.
Even without pressing the [
play the keyboard. There is no count-in played when you start by playing rather than
pushing the [
When recording starts, the [
light up.
Stop Recording
7.
Press the [
Recording stops.
The performance is recorded to the [1/Whole] button.
Listening to the Recorded Performance
8.
Press the [
(Reset)] button, then press the [
The recorded performance is played back.
When you press the [
Track buttons assignments for recorded performances
When you record only a keyboard performance, the performance will be assigned to
the track buttons as follows.
• Normal performance (playing a single Tone from the entire keyboard)
The performance is recorded to the [1/Whole] button.
• Layer performance
The performance is recorded to the [1/Whole] button.
• Split performance
The lower part of the keyboard is recorded to the [3/Lower] button, and the
upper part of the keyboard is recorded to the [4/Upper] button.
• Layer performance and Split performance
The lower part of the keyboard is recorded to the [3/Lower] button, and the
upper part of the keyboard is recorded to the [4/Upper] button.
• Drum set or sound effect performance
Recorded on the [R/Rhythm] button.
106
(Play/Stop)] button.
(Play/Stop)] button, recording starts when you
(Play/Stop)] button.
(Play/Stop)] and [
(Play/Stop)] button.
(Play/Stop)] button, playback stops.
(Rec)] buttons' indicators
(Play/Stop)] button.
NOTE
Any performance that has
been recorded is deleted when
the power to the KR is turned
off. If you do not want a
performance deleted, then
save it to an external memory
or to Favorites. Refer to
"Saving Songs" (p. 116).
NOTE
When "Auto Start (p. 180)" is
set to "ON," and no action is
taken for a certain period of
time after you have recorded a
performance, a confirmation
screen asking you if you want
to delete the song appears in
the display.
If you touch <OK>, the song is
deleted and the demo begins.
If you want to return to the
previous screen and continue
with the recorded
performance, touch <Cancel>.
Advertisement
Table of Contents
