Block Diagram; Main Features - Roland Edirol M-10MX Owner's Manual

Block Diagram

VOLUME
Stereo Mini
INPUT 1/2
Plug-in power
SENS
compatible
CHANNEL
VOLUME
SENS
INPUT 1/2
1/4" Phone
SENS
CHANNEL
VOLUME
SENS
INPUT 3/4
1/4" Phone
SENS
CHANNEL
VOLUME
SENS
INPUT 5/6
1/4" Phone
INPUT 5/6
RCA
CHANNEL
VOLUME
INPUT 7/8
RCA
CHANNEL
VOLUME
INPUT 9/10
RCA

Main Features

The M-10MX is a lightweight and compact mixer providing 10 channels of input (5 stereo channels),
and is an ideal choice for multimedia applications. In addition to covering conventional mixing needs, it
can also be used for audio mixing when editing videos.
A Rich Array of Input/Output Jacks
Phone jacks and RCA pin jacks are provided for
input, allowing you to connect mics, electronic
instruments, or any other type of audio device.
Plug-in powered mics are also supported by a
special input jack (stereo mini).
Two-way Power Supply
The M-10MX can be powered by the supplied AC
adaptor or by batteries. A switch lets you select
the desired type of power supply.
PHONES
VOLUME
Stereo Mini
PHONES
MAIN
VOLUME
TRS Impedance Balanced
MAIN OUTPUT
OVER
RCA
LOAD
COAXIAL
A/D
DIGITAL OUTPUT
OPTICAL
Digital Output
Two types of digital output connectors (optical
and coaxial) are also provided. These output the
mixed sound as 24-bit, 96 kHz digital audio.
Additionally, either 44.1, 48, or 96 kHz can be
selected as the sampling frequency.
Headphone Jack
A headphone jack is provided for convenient
practicing on your own or at night.
5
Connections
Example 1) Mixing and Switching Sound for DTMP
* "DTMP" (Desk-Top Media Production) refers to setups that let you use your computer in new ways to enjoy
video and music.
Mixer Sound Module
If you're using the M-10MX
as a sub-mixer for another
mixer, connect the OUTPUT
L/R jacks to the input jacks
of your other mixer.
R L
TRS Balanced
Included
AC adaptor
Stereo
Headphones
Audio Interface
Computer
Set the SAMPLE RATE switch to match the M-10MX's
sample rate to the sample rate of your audio interface.
* You must minimize the volume of the MAIN and the your digital powered monitor speakers before you turn the
M-10MX's power on or off.
Sound Module
Keyboard
Dynamic Mic
L R L R L R
If you're using a
monaural dynamic
mic, connect it to
channel 1 (MIC) or
channel 3 (MIC).
Coaxial
Cable
Optical Cable
Digital Powered Monitor
For the highest audio
quality, set the
SAMPLE RATE switch
to 96 kHz.
6