Changing The Wall Type; Sustain Effect; Changing The Sustain Length - Roland Music Atelier AT20s Owner's Manual

Changing the Wall Type

By changing the type of reverb (p. 88) you can experience the
feeling of performing in various different locations, and by
changing the Wall Type (wall material) you can make further
adjustments to the way in which reverberation occurs.
1. Press the [Utility] button.
2. Press the Menu [
select "Wall Type."
fig.11-04
3. Press the Value [-] and [+] buttons to select a
Wall type.
DRAPERY
CARPET
ACOUSTIC TILE
WOOD
BRICK
PLASTER
CONCRETE BLOCK
MARBLE
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
] and [ ] buttons to
Pleated curtain
Carpet
Acoustical tile, sound-absorptive
tile
Wood
Brick
Plaster
Concrete block
Marble

Sustain Effect

Sustain allows you to add a Sustain effect or decay to each
voice after the keys are released.
1. Press the [Utility] button.
2. Press the Menu [
select "Sustain."
3. Press the Part [
the part whose sustain you wish to adjust.
Keyboard
Upper, Lower, Pedal
4. Press the Value [-] and [+] buttons to adjust the
setting.
ON The Sustain effect is applied to the voices
OFF The Sustain effect is not applied to the voices
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.

Changing the Sustain Length

The sustain length can be set independently (SHORT,
MIDDLE (Medium) or LONG) for the Upper and Lower
keyboards and Bass Pedalboard. You can make a separate
setting for each keyboard.
1. Press the [Utility] button.
2. Press the Menu [
select "Sustain Length."
fig.11-06
3. Press the Part [
the part whose sustain length you wish to adjust.
Keyboard Upper, Lower, Pedal
4. Press the Value [-] and [+] buttons to adjust the
setting.
Settings SHORT, MIDDLE, LONG
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
Adjusting the Effects
] and [ ] buttons to
] and [ ] buttons to select
] and [ ] buttons to
] and [ ] buttons to select
89