Selecting A Voice Using The [Others] Button - Roland Music Atelier AT20s Owner's Manual

■ Selecting a Voice Using the [Others] Button

Notice that there is an [Others] button for each of the "Organ," "Orchestral" sections of
the Upper and Lower voices, for the "Solo" section, and for the "Pedal" sections of the
Pedal bass voice. By using the [Others] button, you can select all the other voices, the
ones that can't be selected directly by pressing voice buttons.
1.
Press the [Others] button for the Part for which you wish to specify
a voice.
The voice name appears in the display.
fig.02-10 (P.29)
The indicator of the selected [Others] button will light.
2.
While the voice name is shown in the display screen, use the Value
[-] [+] buttons to select the desired voice.
The indicator of the selected [Others] button will blink.
You can jump by voice group by pressing Part [
The sound number of each voice is preceded by an alphabetical character A–V which indicates
the sound group; e.g., "G11 Strings1."
3.
Once again, press the [Others] button for the part whose sound you
wish to set to confirm the voice.
The indicator of the [Others] button will change from blinking to lit.
To stop mid-way through this or any procedure, press the [Display/Exit] button.
About the voices that can be assigned to an [Others] button, please refer to "Voice List" (p.
105).
Selecting and Playing Sounds
] [ ] to select the voice group.
25