9. Select "Complete Image Download", then
click "Reset Bus" to erase the flash memory.
10. If the FW is ready, click "Start Download"
to execute the firmware upgrade.
- Click "Yes".
11. It takes about several minutes, the
firmware upgrade process is finished,
"Download completed" will appear on the
screen.
- Unplug RS232 cable and power cord.
(for X1261/H5360)
Note: Please unplug USB cable and power
cord. (for X1161/X1161A/X1161N/X110)
12. Check FW version.
- Re-plug in power cable, then restart the
unit and get into the Service Mode to
check the firmware version.
(To get into Service Mode, please press
"Power", "Left", "Left" and "Menu" buttons
sequentially on remote controller.)
X1161/X1261/X1161A/X1161N/X110/H5360 Confidential
5-7