Flx Uc Device Manager; Installation & Third Party Application Configuration; For Windows - Yamaha 10-FLXUC500-NA Installation And Operation Manual

FLX UC Device Manager

The FLX UC 500 has native support for the volume, mute and call controls for
a number of softphones, conferencing and webinar applications. Where native
support is provided, no additional software needs to be loaded on the PC, Mac
or Chromebook device. The current list of natively supported applications can
be found of the Revolabs product support webpage:
http://www.revolabs.com/uc500
For other softphones, unified communications or webinar applications, volume,
mute and call control is implemented using the FLX UC Device Manager
application.
This application provides an interface for:
 Easy access to softphone controls
 Configuration of a variety of softphones, unified communication, and
webinar applications
 Configuration of application-specific commands for answer, reject, and
hang-up support using buttons on the FLX UC 500
 UC 500 configuration settings
 Configuration to launch the Device Manager upon windows start-up
Installation & Third Party Application Configuration

For Windows

1. Download the firmware bundle from http://www.revolabs.com/uc-500.
2. Unzip the downloaded file.
3. Double click the Setup.exe file in the folder to install the application on
your PC.
4. Navigate to Start > All Programs > Revolabs > FLX UC Device Manager and
open the application.
8