Getting Started; Connecting The Device; Powering The Device; Connecting To A Computer - Yamaha 10-FLXUC500-NA Installation And Operation Manual

Getting Started

Connecting the Device

Included in the box of the FLX UC 500 are: 1 FLX UC 500 base unit, 1 USB
cable, 1 power adapter with adapter clips (in some markets), and a quick start
guide. Remove all these items from the packaging.

Powering the Device

The FLX UC 500 is powered using an AC power adapter to drive the powerful
speaker elements in the device. In order to power the device, select the
appropriate adapter clip for the region, and connect it to the plug adapter.
Insert the power adapter into the wall socket and the barrel connector into the
FLX UC 500 power connector on the bottom of the unit. The unit will power on
and play a chime once it booted.
Power
Connection

Connecting to a Computer

Using the USB cable that came with the device, connect the type B mini USB
connector on the cable into the connector identified in the figure above.
Connect the type A USB connector on the cable to the USB port on the
computer that will be used with the FLX UC 500 for third party softphone,
webinar, or conferencing applications.
The computer may detect that it needs to load new driver software to install the
FLX UC 500; wait until the install has completed before continuing.
Figure 2: FLX UC 500, Connector View
USB
Connection
6