Table of Contents
Advertisement
Checking the Performance
8.
Press the [
] button.
The results of your performance is shown in the musical notation in the Check screen,
like that below.
fig.d-VisualLesson-2-e
Rhythm (Blue)
The timing of the accent
was off.
Button
Cursor button
[
(Bwd)] button
[
(Fwd)] button
[
(Play/Stop)]
button
Displaying the Menus
9.
Press the [
] button.
The following screen appears.
fig.d-VisualLesson5-e_50
Grayed Out
The proper note was not played.
? (Green)
A note not in the notation was played.
Pitch (Red)
The pitch was incorrect.
How It Is Used
You can switch the performance to be checked by pressing
the
cursor up or down button. Pressing the
down button when "Ref." (reference) is selected switches the
performance to "You" (the results of your performance).
Pressing the
cursor up button when "You" (the results
of your performance) is selected switches the performance
to "Ref." (reference).
You can check each note in the performance, one note at a
time, by pressing the
cursor left or right button.
The notation is switched, going back one measure in the
notation each time the button is pressed.
The notation is switched, advancing one measure in the
notation each time the button is pressed.
You can use this to play back the performance selected with
the
cursor button ("Ref." [reference] or "You" [the
results of your performance]).
Try Out the HPi-6S's Lesson Functions!
cursor
39
Advertisement
Table of Contents
