Roland HP302 Owner's Manual page 15

7 8 9
[Metronome] button
11
Turns the internal metronome on/off (p. 26).
[ ] (Play/Stop) button
12
• Stops/starts playback of an internal song or a
recorded performance (p. 39).
• Starts/stops recording of your performance
(p. 43).
[ ] (Rec) button
13
This lets you record your own performance into the
HP302 (p. 43).
Track buttons
14
• Allows you to play back your performance
separately for each hand (p. 40).
• Records your performance separately for each
hand (p. 50).
• Holding down the [Right] button will disable all
button operations (Panel Lock) (p. 38).
[Power] switch
15
Turns the power on/off (p. 21).
Ground terminal
16
For added safety, you can connect this screw to a
grounding rod or a grounded earth wire (p. 19).
DC In jack (DC Inlet)
17
Connect the supplied AC adaptor here (p. 18).
Pedal connector
18
Connect the pedal cord of the dedicated stand to
this connector (p. 18).
10 11
19
Names of Things and What They Do (HP302)
12 13 14
17
16
21
20
USB connector
19
You can connect this to your computer for
transferring performance data (p. 72).
MIDI Out/In connectors
20
You can connect these to external MIDI devices to
transfer performance data (p. 69).
Input jacks (L/Mono, R)
21
Here you can connect an audio device or another
electronic musical instrument, and listen to the
connected device through the HP302's speakers
(p. 67).
Output jacks (L/Mono, R)
16 22
You can connect an audio device or external
powered speakers here to reproduce the HP302's
sound (p. 67).
Phones jacks
23
Here you can connect headphones (p. 23).
Pedal
24
• These are used mainly when playing piano (p. 22).
• You can assign a variety of functions to the pedals
(p. 59).
External Memory connector
25
Here you can connect USB memory, a CD drive, or a
floppy disk drive, and use it to play or save songs
(p. 62).
18
22
17