Reference; Troubleshooting - LG MCV902 Owner's Manual

Reference

Troubleshooting

Symptom
• The power cord is disconnected.
No power
• The audio cables (or SYSTEM connector
jack) are not connected securely.
• The power of the external source
No sound
equipment is switched off.
• The speaker cable is set to a wrong
position.
• No disc is inserted.
• An unplayable disc is inserted.
• The disc is placed upside down.
The unit does not
start playback
• The disc is not placed within the guide.
• The disc is dirty.
• The remote control is not pointed at the
remote sensor of the unit.
• The remote control is too far from the
The remote
unit.
control does not
• There is an obstacle in the path of the
work properly
remote control and the unit.
• The batteries in the remote control are
exhausted.
18
Cause
• Plug the power cord into the wall outlet
• Connect the audio cable (or SYSTEM
• Turn on the equipment connected with
• Set the speaker cable to the correct
• Insert a disc.
• Insert a playable disc.
• Place the disc with the playback side
• Place the disc on the disc tray correctly
• Clean the disc.
• Point the remote control at the remote
• Operate the remote control within about
• Remove the obstacle.
• Replace the batteries with new ones.
Correction
securely.
connector jack) into the jacks securely.
the audio cable.
position, then turn on the unit again by
pressing POWER.
down.
inside the guide.
sensor of the unit.
23 ft (7 m).