Download Print this page

Borglocks BL5001 Installation Information page 4

5000 series

Advertisement

Installation Problems
Problem
The lever cannot be
rotated after entering
a new code.
Clutch keeps breaking
out.
The latch bolt does
not move smoothly in
and out.
The lever is stiff after
changing the handing
of lock.
After installation problems
Problems
If the outside lever is
dropping.
The Borg guarantee
it will be repaired free of charge.
Please call our helpline for
sales@borglocks.com
DISCLAIMER. Under no circumstances should the lock be dismantled, as this will invalidate your
warranty.
Please Visit The Borg Locks
Cause
After changing the factory
code, one or more of the
coded tumblers are the wrong
way around.
The wrong type of lock case
is being used.
The lock is not installed
correctly.
Grub screw may have been
over tightened.
Cause
The lever has been forcibly
turned
&
the
clutch has
broken out.
If a Borg Lock should develop a fault due to manufacture within 1 years from date of purchase
spares, repairs
Ltd.
Website fo r further information @ WWW. BORGLOCKS.COM.
Re-read the code change instruction and check that all
the
tumblers
outwards.
The lock case may be over sprung to suit non sprung
furniture. If double sprung, remove one of the springs.
A MINIMUM of 40
required on the latch bolt to ensure smooth operation.
Check that
the lock is square on the door and
positioned accurately over the lock case. Check that
the lock case is positioned horizontally and parallel to
spindle is too long it may be trapped between the front
and back plate.
If you have changed the handing of the lock then make
sure that the grub screw has not been over tightened:
Someone may have tried to force entry or has entered
the wrong code and forced the lever to gain entry.
There is a clutch protection system that protects the
lock and the lock case from damage. If the handle is
dropping, then you will need to reset the clutch
mechanism by lifting the lever to the horizontal
position.
If this does not solve the problem please call our
technical support line
and technical
advice
Solution
have
the square notches
O
( preferable 45 ) travel is
Solution
on 0800 44 88 377.
on 0800 44 88 377 Or E-mail:
facing
O

Advertisement

loading

This manual is also suitable for:

Bl5201Bl5401