Roland C-190 Owner's Manual page 7

N MANUAL II tilt tabs
These tabs allow you to add a second voice to the
notes you are playing using the MANUAL I division (if
the [II/I] indicator lights) or to play a separate sound in
the right half, which then behaves like a second man-
ual (see p. 12).
Note: The volume of the MANUAL II division can only be set
with an optional expression pedal. But since it is the only sec-
tion that doesn't have a separate volume control, you can bal-
ance its level by changing the volume of the other divisions.
O REC button
Your C-190 also contains a digital recording function.
Press this button to select the record standby mode.
(Then press [PLAY] to start recording.) There are four
song memories. See p. 18.
P PLAY button
The function of this button depends on the REC indi-
cator: if it flashes, pressing [PLAY] starts the record-
ing of a new song. If the REC indicator is off, [PLAY]
allows you to listen to a previously recorded song.
By pressing it simultaneously with the [REC] button,
you activate the C-190's demo mode (see p. 10).
N
O P Q R
Q REVERB button
Press this button to switch the digital reverb effect
on (indicator lights) or off. See p. 16.
R WINDCHEST PANNING button
Press this button to access a function that allows you
to set the distribution of the organ notes in the ste-
reo image. There are four possible settings (see the
indicators and icons above this button), and each
organ voice can be assigned the preferred stereo dis-
tribution. See page 20.
r
C-190 Portable Organ
Front panel
7