Goji GINBT14 Instruction Manual

Safety Warnings
• For traffic safety, do not use
earphones while driving or cycling.
• Avoid listening to sound at high
levels for prolonged periods of
time. This may be harmful to you
and may cause hearing loss.
• The socket outlet that is installed
near equipment must be easily
In-ear
accessible.
Wireless Sport Headphones
• Do not use device in the
environment of too high or too
Instruction Manual low temperature, never expose the
GINBT14 device under strong sunshine or
too wet environment. The suitable
temperature for the device and
accessories is 0°C - 45°C.
• This device complies with R&TTE
Directive 1999/5/EC. Operation
is subject to the following two
conditions: (1) this device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
Unpacking
Remove all items from the packaging. Retain the
The manufacturer is not packaging. If you dispose of it please do so according to
responsible for any radio or
local regulations.
TV interference caused by
unauthorized modifications The following items are included:
to this equipment. Such
modifications could void the
user's authority to operate the
equipment.
Instruc tion
Manua l
Long-term exposure to loud
music may cause hearing
damage. It is best to avoid
Main Unit USB Charging Instruction
extreme volume when using
Cable Manual
earphones, especially for
extended periods.
Ear Hoops Ear Caps
Product Overview Charging the Headphones
1. Ear cap
1
2. button
2
• Switch the
3
headphones on/off
4
• Multi-functional
5
6 3. Charging socket
7
4. Ear Hoop
8
1. On first use, or when you hear "Battery Low", you
5. Status indicator
9 need to charge the headphones.
6. – button
2. Use the USB charging cable to connect the
Decrease volume or
headphones to your computer. The red indicator light
go to previous track
will stay on during charging.
7. Noise reduction mic
3. When the battery is fully charged, the red indicator
8. + button
light will wink out and the blue indicator light will
Increase volume or go
stay on. Remove the USB charging cable.
to next track
9. Talking mic
It takes approximately 1.5 hours to fully charge the battery.
4. If necessary, enter the passcode, "0000", to pair and
• Attention should be given to the environmental
connect the headphones. Some device also ask to
aspects of battery disposal.
confirm the headset connection after pairing.
• Batteries (battery pack or batteries installed) must not
be exposed to excessive heat such as sunshine, fire or 5. When pairing and connection is successful, you will
the like.
hear "Connection successful".
• To pair with another mobile phone, follow the steps
Pairing for the 1st Time
for "Pairing for the 1st Time". After pairing successfully,
restart the headphones to connect to the 2 paired
mobile phones automatically.
To pair headphones that have never been paired with a
• If the headphones cannot pair successfully, switch off
Bluetooth device before, please follow the steps below:
the headphones. Repeat from step 1.
1. Switch on the headphones by pressing and holding
until you hear "Power on" and "Pairing". The
headphones are now in pairing mode.
2. Activate the Bluetooth feature on the mobile phone
or music player, and set it to search for new Bluetooth
devices.
3. Select "GINBT14" on the mobile phone or music
player. Some mobile phones list an option to "play
through headset". Select to use the headphones.