Other Settings
H-ACTIVITY ON/OFF
Turn this On when using certain applications (such as Pro Tools LE). If this is On, the
message "90 00 7F" will be transmitted to "A-PRO 2" at intervals of approximately 500
ms.
1
Simultaneously press the [ACT] button and the [
2
Use the [VALUE] knob to select "SYSTEM SETTING," and press the
[ENTER] button.
fig.lcd-HACTVTY.eps
3
Use the [VALUE] knob to choose
"H-ACTVTY ON/OFF," and press the
[ENTER] button.
fig.lcd-HACTVTY1.eps
4
Use the [VALUE] knob to specify
either "ON" or "OFF."
5
Press the [ENTER] button.
L9 FUNCTION
This specifies the function of the [HOLD] button.
1
Simultaneously press the [ACT] button and the [
2
Use the [VALUE] knob to select "SYSTEM SETTING," and press the
] button.
[ENTER] button.
fig.lcd-L9FUNC.eps
3
Use the [VALUE] knob to choose "L9
FUNCTION," and press the [ENTER]
button.
fig.lcd-L9FUNC1.eps
4
Use the [VALUE] knob to specify the
function of [HOLD] button.
5
Press the [ENTER] button.
Value
Setting
1
L9
Any desired MIDI message can be assigned to the button.
The button will allow the sound to continue even after you
2
HOLD
take your hand off the pad.
3
VLINK
The button will operate as a V-LINK ON/OFF button.
System Settings (EDIT Mode)
] button.
Explanation
69