RX-ES29GC / RX-ES29GS / RX-ES29GT
Step 4: Remove 2 screws.
Step 5: Release all the connectors (CP501, CP402 & CP801).
Step 6: Release 3 Catches and remove Power On P.C.B. and
standby Led P.C.B..
Step 7: Release the Sensor P.C.B. as arrow shown.
Step 8: Remove the Main P.C.B. as arrow shown.
12.3.6. Disassembly of Battery and Power
P.C.B.
Follow (step 1) to (step 9) of item 12.3.1.
Follow (step 1) to (step 3) of item 12.3.4.
Follow (step 1) to (step 8) of item 12.3.5.
Step 1: Remove 1 screw.
Step 2: Remove the Battery Support P.C.B..
Note: Remember to place the Battery Support P.C.B. to
original location.
18